Brake Master Cylinder VRC Clamp Mirror Holder Lever Ratio 18-16mm φ14 Short Lever

[GALE SPEED VRC14X-17BMS Brake Master Cylinder VRC Clamp Mirror Holder Lever Ratio 18-16mm φ14 Short Lever] ■Brake Master φ14 ・A forged radial master cylinder equipped with a proprietary variable ratio lever. The fulcrum-to-point of action of the lever can be adjusted up to 2mm in 0.25mm increments, allowing the brake feel, which is affected by the caliper combination, to be brought closer to the ideal state. ・In addition, three types of clamps (four types for brakes) and two sizes of levers are available to suit the vehicle and individual rider preferences. By making all combination patterns standard equipment, the hassle of purchasing optional parts is reduced. ●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid. (This may cause malfunctions or fluid leaks.) ■Bolt Pitch: P1.00 [Round Lever] ・Features a round-shaped lever that can be pulled by sliding with a finger. ●Photos may differ from the actual product. ●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid, as it may cause malfunctions or fluid leaks. ●Bolt Pitch: P1.00 ●Price is for the master cylinder body only. ●Ensure adequate torque management during installation. The installation torque for the M6 clamp bolt is 12 N・m. ●If the measurement point for the vehicle height stated on the vehicle inspection certificate is the master cylinder (mainly the master cup), a change exceeding ±40mm requires a structural modification procedure. ●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it is characterized by its naturally developed color finish. Therefore, the color tone may differ from the posted photos depending on various conditions. Returns or exchanges based on color tone will not be accepted. Please understand. Specifications: ・Cylinder Diameter: φ14 ・Fulcrum-to-point of action: 18-16mm (in 0.25mm increments) ・Clamp Type: Mirror Holder ・Lever Size: Short (Round Type) Notes on images: *Photos show the standard lever. *Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.