Brake Master Cylinder VRC Clamp Standard Lever Ratio 18-16mm φ16 Standard Lever

【GALE SPEED VRC16A-17B Brake Master Cylinder VRC Clamp Standard Lever Ratio 18-16mm φ16 Standard Lever】
■Brake Master φ16
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum-to-load point of the lever can be adjusted in 0.25mm increments up to 2mm, allowing for a finer adjustment of the brake feel, which was previously determined by the combination with the caliper.
・In addition, three clamp types (four types for brakes) and two lever sizes are available to suit the vehicle and individual rider preferences. By making all possible combinations standard equipment, the hassle of purchasing optional parts is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid. (This may cause malfunction or fluid leakage.)
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that can be pulled by sliding a finger.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid, as it may cause malfunction or fluid leakage.
●Bolt Pitch: P1.00
●This is the price for the master cylinder body only.
●Ensure proper torque management during installation. The tightening torque for the M6 clamp bolt is 12N・m.
●If the measurement point for vehicle height stated on the vehicle inspection certificate is the master cylinder (mainly the master cup), a change exceeding ±40mm requires a structural modification procedure.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural color finish. Therefore, the color tone may vary from the posted photos depending on various conditions. We cannot accept returns or exchanges due to color tone. Please be aware of this.
Specifications:
・Cylinder diameter: φ16
・Fulcrum to load point: 18-16mm (in 0.25mm increments)
・Clamp type: Standard
・Lever size: Standard (round type)
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware of this.