Brake master cylinder VRC clamp mirror holder lever ratio 18-16mm φ16 standard lever

【GALE SPEED VRC16A-17BM Brake Master Cylinder VRC Clamp Mirror Holder Lever Ratio 18-16mm φ16 Standard Lever】
■Brake Master φ16
・A forged radial master cylinder equipped with our uniquely developed variable ratio lever. The fulcrum-to-point of action of the lever can be adjusted in 0.25mm increments up to a maximum of 2mm, allowing for a finer tuning of brake feel, which is often dictated by the caliper combination.
・Furthermore, to accommodate the vehicle and individual rider preferences, three types of clamps (four types for brakes) and two lever sizes are available. By providing all combination patterns as standard equipment, we reduce the hassle of purchasing optional parts.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids. (This may cause malfunction or fluid leakage.)
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that allows for a smooth pull with your fingers.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Silicone-based or mineral-based brake fluids should not be used as they can cause malfunction or fluid leakage.
●Bolt Pitch: P1.00
●This price is for the master cylinder body only.
●When installing, ensure proper torque management. The tightening torque for the M6 clamp bolt is 12N・m.
●If the measurement point for vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), a change exceeding ±40mm requires a structural modification procedure.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural color finish. Therefore, the color tone may vary from the posted photos depending on various conditions. Returns or exchanges based on color tone will not be accepted. Please be aware of this.
Specifications:
・Cylinder Diameter: φ16
・Fulcrum-to-Point of Action: 18-16mm (0.25mm increments)
・Clamp Type: Mirror Holder
・Lever Size: Standard (Round Type)
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware of this.