1
/
of
1
Brake Master Cylinder VRC Clamp Mirror Holder Lever Ratio 18-16mm φ16 Short Lever
Brake Master Cylinder VRC Clamp Mirror Holder Lever Ratio 18-16mm φ16 Short Lever
SKU:ac-vrc16a-17bms
Regular price
¥42,447
Regular price
¥45,100
Sale price
¥42,447
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Ships in 2-6 business days
配送方法／参考送料：Courier delivery: shipping fee ¥698
425
points to be awarded
Couldn't load pickup availability
【GALE SPEED VRC16A-17BMS Brake Master Cylinder VRC Clamp Mirror Holder Lever Ratio 18-16mm φ16 Short Lever】
■Brake Master φ16
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum to operating point of the lever can be adjusted from 0.25mm increments up to a maximum of 2mm, allowing the brake feel, which was previously determined by the caliper combination, to be brought closer to the optimal state.
・In addition, three types of clamps (four types for brakes) and two sizes of levers are available to suit the vehicle and individual rider preferences. By making all combination patterns standard equipment, the hassle of purchasing optional parts is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid. (This can cause malfunctions or fluid leaks.)
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that can be pulled by sliding with your finger.
●The photo may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid as it can cause malfunctions or fluid leaks.
●Bolt Pitch: P1.00
●Price is for master cylinder body only.
●Ensure sufficient torque management when installing. The installation torque for the M6 clamp bolt is 12N・m.
●If the measurement point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require a structural modification procedure.
●The main body and clamp parts are treated with highly durable "hard alumite." Unlike general colored alumite, it is characterized by its naturally colored finish. Therefore, the color tone may differ from the posted photo depending on various conditions. Returns or exchanges due to color tone are not accepted. Please understand.
Specifications:
・Cylinder Diameter: φ16
・Fulcrum to Operating Point: 18-16mm (0.25mm increments)
・Clamp Type: Mirror Holder
・Lever Size: Short (Round Type)
Notes on images:
*The photo shows a standard lever.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.
■Brake Master φ16
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum to operating point of the lever can be adjusted from 0.25mm increments up to a maximum of 2mm, allowing the brake feel, which was previously determined by the caliper combination, to be brought closer to the optimal state.
・In addition, three types of clamps (four types for brakes) and two sizes of levers are available to suit the vehicle and individual rider preferences. By making all combination patterns standard equipment, the hassle of purchasing optional parts is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid. (This can cause malfunctions or fluid leaks.)
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that can be pulled by sliding with your finger.
●The photo may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid as it can cause malfunctions or fluid leaks.
●Bolt Pitch: P1.00
●Price is for master cylinder body only.
●Ensure sufficient torque management when installing. The installation torque for the M6 clamp bolt is 12N・m.
●If the measurement point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require a structural modification procedure.
●The main body and clamp parts are treated with highly durable "hard alumite." Unlike general colored alumite, it is characterized by its naturally colored finish. Therefore, the color tone may differ from the posted photo depending on various conditions. Returns or exchanges due to color tone are not accepted. Please understand.
Specifications:
・Cylinder Diameter: φ16
・Fulcrum to Operating Point: 18-16mm (0.25mm increments)
・Clamp Type: Mirror Holder
・Lever Size: Short (Round Type)
Notes on images:
*The photo shows a standard lever.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.
適合車種の情報は現在登録されていません。
