Brake master cylinder VRC clamp tank stay lever ratio 18-16mm φ16 standard lever

[Galespeed VRC16A-17BT Brake Master Cylinder VRC Clamp Tank Stay Lever Ratio 18-16mm φ16 Standard Lever] ■Brake Master φ16 ・Forged radial master cylinder equipped with a proprietary variable ratio lever. The fulcrum-to-load point of the lever can be adjusted up to 2mm in 0.25mm increments, allowing you to fine-tune the brake feel, which was previously influenced by the caliper combination, to an optimal state. ・In addition, three clamp types (four for brakes) and two lever sizes are available to suit the vehicle and individual rider preferences. By making all combination patterns standard equipment, the hassle of purchasing options is reduced. ●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids. (This may cause malfunction or fluid leakage) ■Bolt Pitch: P1.00 [Round Lever] ・Features a round-shaped lever that can be pulled by sliding with a finger. ●Photos may differ from actual products. ●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids as they may cause malfunction or fluid leakage. ●Bolt Pitch: P1.00 ●Price is for master cylinder body only. ●Ensure sufficient torque management when installing. The tightening torque for the M6 clamp bolt is 12N・m. ●If the measurement point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), a change exceeding ±40mm requires a structural change procedure. ●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural color finish. Therefore, the color tone may vary from the posted photos depending on various conditions. Returns and exchanges based on color tone will not be accepted. Please be aware of this. Specifications: ・Cylinder Diameter: φ16 ・Fulcrum-to-load point: 18-16mm (0.25mm increments) ・Clamp Type: Tank Stay ・Lever Size: Standard (round type) *The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware of this.