1
/
of
1
Clutch Master Cylinder VRC Clamp Standard Lever Ratio 18-16mm φ16 Short Lever
Clutch Master Cylinder VRC Clamp Standard Lever Ratio 18-16mm φ16 Short Lever
SKU:ac-vrc16a-17cs
Regular price
¥42,447
Regular price
¥45,100
Sale price
¥42,447
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Ships in 2-6 business days
配送方法/参考送料:Courier delivery: shipping fee ¥698
425
points to be awarded
Couldn't load pickup availability
[GALE SPEED VRC16A-17CS Clutch Master Cylinder VRC Clamp Standard Lever Ratio 18-16mm φ16 Short Lever]
■Clutch Master φ16
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum-to-load point of the lever can be adjusted up to 2mm in 0.25mm increments, allowing the brake feel, which used to be determined by the caliper combination, to be brought closer to its optimal state.
・In addition, three types of clamps (four types for brakes) and two sizes of levers are available to suit the vehicle and individual rider preferences. By making all possible combinations standard equipment, the hassle of purchasing options is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid. (This can cause malfunctions or fluid leaks.)
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that can be pulled with a sliding motion of the finger.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid as it may cause malfunctions or fluid leaks.
●Bolt Pitch: P1.00
●This is the price for the master cylinder body only.
●Ensure sufficient torque management when installing. The installation torque for the M6 clamp bolt is 12 N·m.
●If the measurement point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require structural modification procedures.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural color finish. Therefore, the color tone may differ from the posted photos depending on various conditions. Returns or exchanges based on color tone are not accepted. Please understand.
Specifications:
・Cylinder Diameter: φ16
・Fulcrum to Load Point: 18-16mm (in 0.25mm increments)
・Clamp Type: Standard
・Lever Size: Short (Round Type)
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.
■Clutch Master φ16
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum-to-load point of the lever can be adjusted up to 2mm in 0.25mm increments, allowing the brake feel, which used to be determined by the caliper combination, to be brought closer to its optimal state.
・In addition, three types of clamps (four types for brakes) and two sizes of levers are available to suit the vehicle and individual rider preferences. By making all possible combinations standard equipment, the hassle of purchasing options is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid. (This can cause malfunctions or fluid leaks.)
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that can be pulled with a sliding motion of the finger.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid as it may cause malfunctions or fluid leaks.
●Bolt Pitch: P1.00
●This is the price for the master cylinder body only.
●Ensure sufficient torque management when installing. The installation torque for the M6 clamp bolt is 12 N·m.
●If the measurement point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require structural modification procedures.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural color finish. Therefore, the color tone may differ from the posted photos depending on various conditions. Returns or exchanges based on color tone are not accepted. Please understand.
Specifications:
・Cylinder Diameter: φ16
・Fulcrum to Load Point: 18-16mm (in 0.25mm increments)
・Clamp Type: Standard
・Lever Size: Short (Round Type)
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.
適合車種の情報は現在登録されていません。
