Brake Master Cylinder VRC Clamp Standard Lever Ratio 18-16mm φ17.5 Short Lever

【GALE SPEED VRC17A-17BS Brake Master Cylinder VRC Clamp Standard Lever Ratio 18-16mm φ17.5 Short Lever】
■Brake Master φ17.5
・Forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum to point of action of the lever can be adjusted in 0.25mm increments up to a maximum of 2mm, allowing the brake feel, which was previously determined by the caliper combination, to be brought closer to the optimal state.
・Furthermore, three types of clamps (four types for brakes) and two types of lever sizes are set to accommodate different vehicles and individual rider preferences. By making all combination patterns standard equipment, the hassle of purchasing optional parts is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluid. (This may cause malfunction or fluid leakage.)
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that can be pulled with a sliding motion of the finger.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluid, as it may cause malfunction or fluid leakage.
●Bolt Pitch: P1.00
●Price is for the master cylinder body only.
●Ensure adequate torque management during installation. The installation torque for the M6 clamp bolt is 12 N·m.
●If the measuring point for the vehicle height stated on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require structural modification procedures.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural color finish. Therefore, the color tone may differ from the posted photos depending on various conditions. Returns and exchanges based on color tone are not accepted. Please be aware.
Specifications:
・Cylinder Diameter: φ17.5
・Fulcrum to Point of Action: 18-16mm (0.25mm increments)
・Clamp Type: Standard
・Lever Size: Short (Round Type)
Image Precautions:
*Photo shows a standard lever
*Images are for illustration purposes, and the design and specifications of the products shown are subject to change without notice. Please be aware.