Brake Master Cylinder VRC Clamp Reverse Thread Mirror Holder Lever Ratio 18-16mm φ19 Short Lever

[GALE SPEED VRC19A-17BGS Brake Master Cylinder VRC Clamp Reverse Thread Mirror Holder Lever Ratio 18-16mm φ19 Short Lever]
■Brake Master φ19
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum-to-point-of-action of the lever can be adjusted up to 2mm in 0.25mm increments, allowing the brake feel, which is affected by the combination with the caliper, to be brought closer to the optimal state.
・In addition, three clamp types (four for brakes) and two lever sizes are available to suit the vehicle and individual rider preferences. By making all combination patterns standard equipment, the hassle of purchasing optional parts is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluid. (This may cause malfunction or fluid leakage)
■Bolt Pitch: P1.00
[Round Lever]
・A round-shaped lever is used, which allows for a smooth pull with your fingers.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluid as it may cause malfunction or fluid leakage.
●Bolt Pitch: P1.00
●Price is for master cylinder body only.
●When installing, ensure proper torque management. The tightening torque for the M6 clamp bolt is 12N・m.
●If the measurement point for vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require structural modification procedures.
●The main body and clamp parts are treated with highly durable "hard anodizing". Unlike general colored anodizing, it features a naturally colored finish. Therefore, the color tone may differ from the posted photos depending on various conditions. Returns or exchanges based on color tone cannot be accepted. Please understand.
Specifications:
・Cylinder Diameter: φ19
・Fulcrum to Point of Action: 18-16mm (0.25mm increments)
・Clamp Type: Reverse thread mirror holder
・Lever Size: Short (round type)
Notes on images:
*The photo shows a standard lever
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.