1
/
of
1
Brake master cylinder VRC clamp (φ25.4) mirror holder lever ratio 18-16mm φ19 straight lever
Brake master cylinder VRC clamp (φ25.4) mirror holder lever ratio 18-16mm φ19 straight lever
SKU:ac-vrc19a-17bm-hd
Regular price
¥44,517
Regular price
¥47,300
Sale price
¥44,517
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Ships in 2-6 business days
配送方法／参考送料：Courier delivery: shipping fee ¥698
446
points to be awarded
Couldn't load pickup availability
【GALE SPEED VRC19A-17BM-HD Brake Master Cylinder VRC Clamp (φ25.4) Mirror Holder Lever Ratio 18-16mm φ19 Straight Lever】
■Brake master cylinder φ19 for inch handlebars (φ25.4)
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum to action point of the lever can be adjusted up to 2mm in 0.25mm increments, allowing you to fine-tune the brake feel, which is usually determined by the caliper, to a more optimal state.
・Additionally, three types of clamps (four for brakes) and two lever sizes are available to suit the vehicle and individual rider preferences. All combination patterns are standard equipment, reducing the hassle of purchasing optional parts.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluid. (This can cause malfunctions or fluid leaks.)
■Bolt pitch: P1.00
[Round lever]
・Features a round-shaped lever that can be pulled by sliding with a finger.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluid, as it can cause malfunctions or fluid leaks.
●Bolt pitch: P1.00
●Price is for master cylinder body only.
●Ensure proper torque management when installing. The tightening torque for the M6 clamp bolt is 12N・m.
●If the measurement point for vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), a change exceeding ±40mm requires a structural change procedure.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural color finish. Therefore, the color tone may vary from the posted photos depending on various conditions. We cannot accept returns or exchanges due to color tone. Please understand.
Specifications:
・Cylinder diameter: φ17.5
・Fulcrum to action point: 18-16mm (in 0.25mm increments)
・Clamp type: For inch handlebars (φ25.4) Mirror holder
・Lever size: Straight (round type)
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.
■Brake master cylinder φ19 for inch handlebars (φ25.4)
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum to action point of the lever can be adjusted up to 2mm in 0.25mm increments, allowing you to fine-tune the brake feel, which is usually determined by the caliper, to a more optimal state.
・Additionally, three types of clamps (four for brakes) and two lever sizes are available to suit the vehicle and individual rider preferences. All combination patterns are standard equipment, reducing the hassle of purchasing optional parts.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluid. (This can cause malfunctions or fluid leaks.)
■Bolt pitch: P1.00
[Round lever]
・Features a round-shaped lever that can be pulled by sliding with a finger.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluid, as it can cause malfunctions or fluid leaks.
●Bolt pitch: P1.00
●Price is for master cylinder body only.
●Ensure proper torque management when installing. The tightening torque for the M6 clamp bolt is 12N・m.
●If the measurement point for vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), a change exceeding ±40mm requires a structural change procedure.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural color finish. Therefore, the color tone may vary from the posted photos depending on various conditions. We cannot accept returns or exchanges due to color tone. Please understand.
Specifications:
・Cylinder diameter: φ17.5
・Fulcrum to action point: 18-16mm (in 0.25mm increments)
・Clamp type: For inch handlebars (φ25.4) Mirror holder
・Lever size: Straight (round type)
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.
適合車種の情報は現在登録されていません。
