1
/
of
1
Brake Master Cylinder VRC Clamp Mirror Holder Lever Ratio 18-16mm φ19 Short Lever
Brake Master Cylinder VRC Clamp Mirror Holder Lever Ratio 18-16mm φ19 Short Lever
SKU:ac-vrc19a-17bms
Regular price
¥42,842
Regular price
¥45,100
Sale price
¥42,842
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Ships in 2-6 business days
配送方法／参考送料：Courier delivery: shipping fee ¥698
429
points to be awarded
Couldn't load pickup availability
【Gale Speed VRC19A-17BMS Brake Master Cylinder VRC Clamp Mirror Holder Lever Ratio 18-16mm φ19 Short Lever】
■Brake Master φ19
・Forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum to operating point of the lever can be adjusted by up to 2mm in 0.25mm increments, allowing the brake feel, which was previously determined by the caliper combination, to be brought closer to the optimal state.
・In addition, three types of clamps (four types for brakes) and two sizes of levers are available to suit the vehicle and individual rider preferences. By making all combination patterns standard equipment, the hassle of purchasing options is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluids. (This can cause malfunctions or fluid leaks)
■Bolt Pitch: P1.00
[Round Lever]
・Uses a round-shaped lever that can be pulled by sliding with a finger.
●Photos may differ from actual products.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluids, as they can cause malfunctions or fluid leaks.
●Bolt Pitch: P1.00
●Price is for master cylinder body only.
●Ensure proper torque management when installing. The tightening torque for the M6 clamp bolt is 12N・m.
●If the measuring point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require a structural modification procedure.
●The main body and clamp parts are treated with highly durable "hard anodizing". Unlike general colored anodizing, it features a naturally occurring color finish. Therefore, the color tone may vary from the posted photos depending on various conditions. Returns or exchanges based on color tone are not accepted. Please be aware.
Specifications:
・Cylinder Diameter: φ19
・Fulcrum to Operating Point: 18-16mm (in 0.25mm increments)
・Clamp Type: Mirror Holder
・Lever Size: Short (Round Type)
Notes on images:
*The photo shows a standard lever.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware.
■Brake Master φ19
・Forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum to operating point of the lever can be adjusted by up to 2mm in 0.25mm increments, allowing the brake feel, which was previously determined by the caliper combination, to be brought closer to the optimal state.
・In addition, three types of clamps (four types for brakes) and two sizes of levers are available to suit the vehicle and individual rider preferences. By making all combination patterns standard equipment, the hassle of purchasing options is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluids. (This can cause malfunctions or fluid leaks)
■Bolt Pitch: P1.00
[Round Lever]
・Uses a round-shaped lever that can be pulled by sliding with a finger.
●Photos may differ from actual products.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluids, as they can cause malfunctions or fluid leaks.
●Bolt Pitch: P1.00
●Price is for master cylinder body only.
●Ensure proper torque management when installing. The tightening torque for the M6 clamp bolt is 12N・m.
●If the measuring point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require a structural modification procedure.
●The main body and clamp parts are treated with highly durable "hard anodizing". Unlike general colored anodizing, it features a naturally occurring color finish. Therefore, the color tone may vary from the posted photos depending on various conditions. Returns or exchanges based on color tone are not accepted. Please be aware.
Specifications:
・Cylinder Diameter: φ19
・Fulcrum to Operating Point: 18-16mm (in 0.25mm increments)
・Clamp Type: Mirror Holder
・Lever Size: Short (Round Type)
Notes on images:
*The photo shows a standard lever.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware.
適合車種の情報は現在登録されていません。
