1
/
of
1
Brake Master Cylinder VRC Clamp Standard Lever Ratio 18-16mm φ19 Short Lever
Brake Master Cylinder VRC Clamp Standard Lever Ratio 18-16mm φ19 Short Lever
SKU:ac-vrc19a-17bs
Regular price
¥42,447
Regular price
¥45,100
Sale price
¥42,447
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Ships in 2-6 business days
配送方法/参考送料:Courier delivery: shipping fee ¥698
425
points to be awarded
Couldn't load pickup availability
[GALE SPEED VRC19A-17BS Brake Master Cylinder VRC Clamp Standard Lever Ratio 18-16mm φ19 Short Lever]
■Brake Master φ19
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum-to-acting point of the lever can be adjusted up to 2mm in 0.25mm increments, allowing the brake feel, which was previously determined by the caliper combination, to be brought closer to an optimal state.
・Additionally, three types of clamps (four for brakes) and two sizes of levers are available to suit the vehicle and individual rider preferences. By making all combination patterns standard equipment, the hassle of purchasing options is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids. (This may cause malfunction or fluid leakage.)
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that can be pulled by sliding with a finger.
●The photo may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids as they may cause malfunction or fluid leakage.
●Bolt Pitch: P1.00
●This price is for the master cylinder body only.
●When installing, ensure proper torque management. The tightening torque for the M6 clamp bolt is 12N・m.
●If the measurement point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), a change exceeding ±40mm requires a structural modification procedure.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a finish with natural coloration. Therefore, the color tone may vary from the posted photos depending on various conditions. Returns or exchanges based on color tone are not accepted. Please be aware of this.
Specifications:
・Cylinder Diameter: φ19
・Fulcrum-to-Acting Point: 18-16mm (0.25mm increments)
・Clamp Type: Standard
・Lever Size: Short (Round Type)
Notes on images:
*The photo shows a standard lever.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware of this.
■Brake Master φ19
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum-to-acting point of the lever can be adjusted up to 2mm in 0.25mm increments, allowing the brake feel, which was previously determined by the caliper combination, to be brought closer to an optimal state.
・Additionally, three types of clamps (four for brakes) and two sizes of levers are available to suit the vehicle and individual rider preferences. By making all combination patterns standard equipment, the hassle of purchasing options is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids. (This may cause malfunction or fluid leakage.)
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that can be pulled by sliding with a finger.
●The photo may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids as they may cause malfunction or fluid leakage.
●Bolt Pitch: P1.00
●This price is for the master cylinder body only.
●When installing, ensure proper torque management. The tightening torque for the M6 clamp bolt is 12N・m.
●If the measurement point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), a change exceeding ±40mm requires a structural modification procedure.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a finish with natural coloration. Therefore, the color tone may vary from the posted photos depending on various conditions. Returns or exchanges based on color tone are not accepted. Please be aware of this.
Specifications:
・Cylinder Diameter: φ19
・Fulcrum-to-Acting Point: 18-16mm (0.25mm increments)
・Clamp Type: Standard
・Lever Size: Short (Round Type)
Notes on images:
*The photo shows a standard lever.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware of this.
適合車種の情報は現在登録されていません。
