1
/
of
1
Clutch master cylinder VRC clamp (φ25.4) mirror holder lever ratio 18-16mm φ19 straight lever
Clutch master cylinder VRC clamp (φ25.4) mirror holder lever ratio 18-16mm φ19 straight lever
SKU:ac-vrc19a-17cm-hd
Regular price
¥44,517
Regular price
¥47,300
Sale price
¥44,517
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Ships in 2-6 business days
配送方法／参考送料：Courier delivery: shipping fee ¥698
446
points to be awarded
Couldn't load pickup availability
【GALE SPEED VRC19A-17CM-HD Clutch Master Cylinder VRC Clamp (φ25.4) Mirror Holder Lever Ratio 18-16mm φ19 Straight Lever】
■φ19 clutch master for inch handlebars (φ25.4)
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum-to-point-of-action of the lever can be adjusted by up to 2mm in 0.25mm increments, allowing the brake feel, which was previously dependent on the caliper combination, to be brought closer to the optimal state.
・In addition, to accommodate different vehicles and individual rider preferences, three types of clamps (four types for brakes) and two lever sizes are available. By making all possible combination patterns standard equipment, the hassle of purchasing optional parts is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid. (This can cause malfunction or fluid leakage)
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that can be pulled by sliding it with a finger.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid as it may cause malfunction or fluid leakage.
●Bolt Pitch: P1.00
●Price is for master cylinder body only.
●Ensure sufficient torque management when installing. The tightening torque for the M6 clamp bolt is 12N・m.
●If the measuring point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require structural modification procedures.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural coloration finish. Therefore, the color tone may vary from the posted photos depending on various conditions. Returns or exchanges based on color tone are not accepted. Please understand.
Specifications:
・Cylinder Diameter: φ19
・Fulcrum to Point of Action: 18-16mm (in 0.25mm increments)
・Clamp Type: Mirror holder for inch handlebars (φ25.4)
・Lever Size: Straight (round type)
*The image is for illustration purposes only, and the design and specifications of the product shown may change without notice. Please understand.
■φ19 clutch master for inch handlebars (φ25.4)
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum-to-point-of-action of the lever can be adjusted by up to 2mm in 0.25mm increments, allowing the brake feel, which was previously dependent on the caliper combination, to be brought closer to the optimal state.
・In addition, to accommodate different vehicles and individual rider preferences, three types of clamps (four types for brakes) and two lever sizes are available. By making all possible combination patterns standard equipment, the hassle of purchasing optional parts is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid. (This can cause malfunction or fluid leakage)
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that can be pulled by sliding it with a finger.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluid as it may cause malfunction or fluid leakage.
●Bolt Pitch: P1.00
●Price is for master cylinder body only.
●Ensure sufficient torque management when installing. The tightening torque for the M6 clamp bolt is 12N・m.
●If the measuring point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require structural modification procedures.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural coloration finish. Therefore, the color tone may vary from the posted photos depending on various conditions. Returns or exchanges based on color tone are not accepted. Please understand.
Specifications:
・Cylinder Diameter: φ19
・Fulcrum to Point of Action: 18-16mm (in 0.25mm increments)
・Clamp Type: Mirror holder for inch handlebars (φ25.4)
・Lever Size: Straight (round type)
*The image is for illustration purposes only, and the design and specifications of the product shown may change without notice. Please understand.
適合車種の情報は現在登録されていません。
