1
/
of
1
Brake Master Cylinder VRC Clamp Reverse Thread Mirror Holder Lever Ratio 20-18mm φ19 Standard Lever
Brake Master Cylinder VRC Clamp Reverse Thread Mirror Holder Lever Ratio 20-18mm φ19 Standard Lever
SKU:ac-vrc19a-19bg
Regular price
¥42,842
Regular price
¥45,100
Sale price
¥42,842
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Ships in 2-6 business days
配送方法／参考送料：Courier delivery: shipping fee ¥698
429
points to be awarded
Couldn't load pickup availability
【GALE SPEED VRC19A-19BG Brake Master Cylinder VRC Clamp Reverse Thread Mirror Holder Lever Ratio 20-18mm φ19 Standard Lever】
■Brake master φ19
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum-to-action point of the lever can be adjusted up to 2mm in 0.25mm increments, allowing you to fine-tune the brake feel, which is usually determined by the caliper combination, to a more optimal state.
・In addition, to accommodate different vehicles and individual rider preferences, three types of clamps (four types for brakes) and two lever sizes are available. By making all possible combination patterns standard equipment, the hassle of purchasing options is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids (this can cause malfunctions and fluid leaks).
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that can be pulled by sliding your finger.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids as they can cause malfunctions and fluid leaks.
●Bolt Pitch: P1.00
●Price is for master cylinder body only.
●Ensure proper torque management when installing. The installation torque for the M6 clamp bolt is 12 N・m.
●If the measurement point for vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require structural modification procedures.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural color finish. Therefore, the color tone may vary from the posted photos depending on various conditions. Returns or exchanges based on color tone will not be accepted. Please be aware of this.
Specifications:
・Cylinder Diameter: φ19
・Fulcrum-to-Action Point: 20-18mm (0.25mm increments)
・Clamp Type: Reverse Thread Mirror Holder
・Lever Size: Standard (Round Type)
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware of this.
■Brake master φ19
・A forged radial master cylinder equipped with a uniquely developed variable ratio lever. The fulcrum-to-action point of the lever can be adjusted up to 2mm in 0.25mm increments, allowing you to fine-tune the brake feel, which is usually determined by the caliper combination, to a more optimal state.
・In addition, to accommodate different vehicles and individual rider preferences, three types of clamps (four types for brakes) and two lever sizes are available. By making all possible combination patterns standard equipment, the hassle of purchasing options is reduced.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids (this can cause malfunctions and fluid leaks).
■Bolt Pitch: P1.00
[Round Lever]
・Features a round-shaped lever that can be pulled by sliding your finger.
●Photos may differ from the actual product.
●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids as they can cause malfunctions and fluid leaks.
●Bolt Pitch: P1.00
●Price is for master cylinder body only.
●Ensure proper torque management when installing. The installation torque for the M6 clamp bolt is 12 N・m.
●If the measurement point for vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require structural modification procedures.
●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural color finish. Therefore, the color tone may vary from the posted photos depending on various conditions. Returns or exchanges based on color tone will not be accepted. Please be aware of this.
Specifications:
・Cylinder Diameter: φ19
・Fulcrum-to-Action Point: 20-18mm (0.25mm increments)
・Clamp Type: Reverse Thread Mirror Holder
・Lever Size: Standard (Round Type)
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware of this.
適合車種の情報は現在登録されていません。
