Brake Master Cylinder VRC Clamp Mirror Holder Lever Ratio 20-18mm φ19 Short Lever

[GALE SPEED VRC19A-19BMS Brake Master Cylinder VRC Clamp Mirror Holder Lever Ratio 20-18mm φ19 Short Lever] ■Brake Master φ19 ・A forged radial master cylinder equipped with a proprietary variable ratio lever. The fulcrum-to-point-of-action distance of the lever can be adjusted by up to 2mm in 0.25mm increments, allowing for fine-tuning of the brake feel, which is typically influenced by the caliper combination, to achieve the optimal state. ・Furthermore, to accommodate different vehicles and individual rider preferences, three types of clamps (four for brakes) and two lever sizes are available. By making all possible combinations standard equipment, the hassle of purchasing optional parts is reduced. ●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids. (This may cause malfunction or fluid leakage.) ■Bolt Pitch: P1.00 [Round Lever] ・Features a round-shaped lever that allows for a smooth pull with your fingers. ●Photos may differ from the actual product. ●Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids as they may cause malfunction or fluid leakage. ●Bolt Pitch: P1.00 ●Price is for master cylinder body only. ●Ensure proper torque management when installing. The installation torque for the M6 clamp bolt is 12N・m. ●If the measurement point for vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), changes exceeding ±40mm require a structural modification procedure. ●The main body and clamp parts are treated with highly durable "hard anodizing." Unlike general colored anodizing, it features a natural color finish. Therefore, the color tone may vary from the posted photos depending on various conditions. Returns or exchanges based on color tone will not be accepted. Please be aware of this. Specifications: ・Cylinder Diameter: φ19 ・Fulcrum-to-point-of-action: 20-18mm (0.25mm increments) ・Clamp Type: Mirror Holder ・Lever Size: Short (Round Type) Notes on images: *Photos show standard lever *Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.