1
/
of
1
Elaborate Clutch Master VRE Clamp Mirror Holder Lever Ratio 20-18mm Black φ19 Standard Lever
Elaborate Clutch Master VRE Clamp Mirror Holder Lever Ratio 20-18mm Black φ19 Standard Lever
SKU:ac-vre19a-19cm
Regular price
¥81,787
Regular price
¥86,900
Sale price
¥81,787
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Ships in 2-6 business days
配送方法/参考送料:Courier delivery: shipping fee ¥698
818
points to be awarded
Couldn't load pickup availability
[Galespeed VRE19A-19CM Elaborate Clutch Master VRE Clamp Mirror Holder Lever Ratio 20-18mm Black φ19 Standard Lever]
■ Clutch Master φ19
・ We have created a superb master cylinder worthy of the word "Elaborate," meaning "to produce with great care or attention to detail" and "skillful." Its performance has been recognized by many racing teams both domestically and internationally, and its excellent appearance, achieved through full 3D machining, will surely satisfy every rider's desire.
・ Equipped with a uniquely developed variable ratio lever. The fulcrum-to-point of action of the lever can be adjusted up to 2mm in 0.25mm increments, allowing you to fine-tune the brake feel, which was previously determined by the caliper combination, to the optimal state.
● Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids. (This may cause malfunction or fluid leakage.)
■ Bolt Pitch: P1.00
[Round Lever]
・ It uses a round-shaped lever that can be pulled by sliding with your finger.
● Photos may differ from the actual product.
● Only glycol ether-based brake/clutch fluid can be used. Silicone-based and mineral-based brake fluids should not be used as they may cause malfunction or fluid leakage.
● Bolt Pitch: P1.00
● This is the price for the master cylinder body only.
● When installing, ensure proper torque management. The installation torque for the M6 clamp bolt is 12 N・m.
● If the measurement point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), a change exceeding ±40mm requires a structural modification procedure.
Specifications:
・ Color: Black
・ Cylinder Diameter: φ19
・ Fulcrum to Point of Action: 20-18mm (0.25mm increments)
・ Clamp Type: Mirror Holder
・ Lever Size: Standard (Round Type)
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.
■ Clutch Master φ19
・ We have created a superb master cylinder worthy of the word "Elaborate," meaning "to produce with great care or attention to detail" and "skillful." Its performance has been recognized by many racing teams both domestically and internationally, and its excellent appearance, achieved through full 3D machining, will surely satisfy every rider's desire.
・ Equipped with a uniquely developed variable ratio lever. The fulcrum-to-point of action of the lever can be adjusted up to 2mm in 0.25mm increments, allowing you to fine-tune the brake feel, which was previously determined by the caliper combination, to the optimal state.
● Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids. (This may cause malfunction or fluid leakage.)
■ Bolt Pitch: P1.00
[Round Lever]
・ It uses a round-shaped lever that can be pulled by sliding with your finger.
● Photos may differ from the actual product.
● Only glycol ether-based brake/clutch fluid can be used. Silicone-based and mineral-based brake fluids should not be used as they may cause malfunction or fluid leakage.
● Bolt Pitch: P1.00
● This is the price for the master cylinder body only.
● When installing, ensure proper torque management. The installation torque for the M6 clamp bolt is 12 N・m.
● If the measurement point for the vehicle height listed on the vehicle inspection certificate is the master cylinder (mainly the master cup), a change exceeding ±40mm requires a structural modification procedure.
Specifications:
・ Color: Black
・ Cylinder Diameter: φ19
・ Fulcrum to Point of Action: 20-18mm (0.25mm increments)
・ Clamp Type: Mirror Holder
・ Lever Size: Standard (Round Type)
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.
適合車種の情報は現在登録されていません。
