Titanium-spec Brake Master VRET φ17.5 (Lever Ratio 18-16mm) Mirror Holder Clamp

【GALESPEED VRET17A-17BM Titanium Brake Master Cylinder VRET φ17.5 (Lever Ratio 18-16mm) Mirror Holder Clamp】
■Product Description
We have created a master cylinder worthy of the word "Elaborate," meaning "to make with great care" or "skillful."
Furthermore, the VRET is a high-end model with titanium parts in key areas.
(Lever adjust dial, bleeder valve, pivot pin, cap bolt, handlebar clamp bolt, adjuster pin)
Its performance, recognized by many racing teams both domestically and internationally, and its excellent appearance achieved through full 3D machining, are sure to satisfy any rider's demands.
Equipped with our uniquely developed variable ratio lever. The distance between the lever's fulcrum and point of action can be adjusted up to 2mm in 0.25mm increments, allowing you to fine-tune the brake feel, which was previously influenced by the caliper combination, to an optimal state.

Specifications
Cylinder Diameter: φ17.5
Fulcrum to Point of Action: 18-16mm
Clamp Type: Mirror Holder Clamp
Lever Length: Standard

■Image Disclaimer
*Images are for illustration purposes only. They may include products with different sizes or colors. Product design and specifications are subject to change without notice. Thank you for your understanding.

Precautions
*Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral-based brake fluids, as they may cause malfunction or fluid leakage.
*Bolt Pitch: P1.00
*This price is for the master cylinder body only.
*Ensure proper torque management during installation. The tightening torque for the M6 clamp bolt is 12N·m.
*If the measurement point for vehicle height stated on the vehicle inspection certificate is the master cylinder (primarily the master cup), changes exceeding ±40mm require a structural modification procedure.