Titanium Specification Clutch Master VRET φ19 (Lever Ratio 20-18mm) Standard Clamp

【Gale Speed VRET19A-19C Titanium Clutch Master VRET φ19 (Lever Ratio 20-18mm) Standard Clamp】
■Product Description
We have created a superb master cylinder worthy of the word "Elaborate," meaning "to produce with great care and attention to detail" or "skillful."
Furthermore, the VRET is a high-end model with titanium parts in the finer details.
(Lever adjust dial, bleeder valve, pivot pin, cap bolt, handle clamp bolt, adjuster pin)
Its performance, recognized by numerous racing teams both domestically and internationally, and its outstanding appearance achieved through full 3D machining, are sure to satisfy every rider's desires.
Equipped with an uniquely developed variable ratio lever. The fulcrum-to-point of action of the lever can be adjusted by up to 2mm in 0.25mm increments, allowing for a more optimal brake feel that was previously dependent on the caliper combination.

Specifications
Cylinder Diameter: φ19
Fulcrum-to-point of action: 20-18mm
Clamp Type: Standard Clamp
Lever Length: Standard

■Image Disclaimer
*Images are for illustration purposes only. They may include products of different sizes or colors. Product design and specifications are subject to change without notice. Thank you for your understanding.

Precautions
*Only glycol ether-based brake/clutch fluid can be used. Do not use silicone-based or mineral oil-based brake fluids as they may cause malfunction or fluid leakage.
*Bolt pitch: P1.00
*Price is for the master cylinder body only.
*Ensure proper torque management during installation. The tightening torque for the M6 clamp bolt is 12N・m.
*If the measurement point for vehicle height stated on the vehicle inspection certificate is the master cylinder (mainly the master cup), a change exceeding ±40mm requires a structural change procedure.