Throttle cam system (excluding ride-by-wire models) KTM 620/625/640/660/690

【G2 Ergonomics G2-40-310-2 Throttle Cam System (excluding ride-by-wire models) KTM 620/625/640/660/690 Bonsai Moto】
The three included cams can be changed with a single touch. The throttle characteristics can be dramatically altered depending on road conditions and rider preference!
By selecting the cam shape that suits the conditions, unnecessary fatigue can be reduced.
Recommended for experts and those just starting out on full-size motocrossers!
Teflon sleeves are built into both ends of the throttle tube, allowing for incomparably smoother throttle control compared to the stock unit!
When used in conjunction with the Jimmy Twister, play is eliminated, resulting in a throttle so light it feels hollow. You'll notice the difference in fatigue!
The throttle end can also be attached and detached with a single touch, so no tools are required when you want to use closed-end handguards.
Detailed Description
The included cam shapes are as follows:
[ 200X ]
Ideal for surfaces with very good traction, including wet sand and wood chips.
A cam for courses with long full-throttle times, such as sand courses.
Same diameter as stock.
[ 300X ]
Ideal for intermediate conditions, including mixed sand and hard terrain.
The most versatile cam for general motocross and enduro.
10% smaller diameter than 100X.
[ 400X ]
Ideal for muddy conditions in woods and hard-pack, or slippery conditions with rocks.
A cam that truly shines in hard enduro and severe muddy conditions.
20% smaller diameter than 100X.
Compatible Models
KTM
・620/625/640/660/690 Duke/LC4/Rally/Adv. (all years)
Notes
*Product colors may change without notice.
*Always adjust the throttle cable.
*Introducing the G2 Throttle Cam System will significantly change the riding feel, so please be very careful.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.