1
/
of
1
LED Customizing Kit Sequential Type GSX-S750
LED Customizing Kit Sequential Type GSX-S750
SKU:cfp-408980
Regular price
¥24,453
Regular price
¥28,050
Sale price
¥24,453
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Ships in 2-6 business days
配送方法／参考送料：Courier delivery: shipping fee ¥698
245
points to be awarded
Couldn't load pickup availability
【CF POSH 408980 LED Customizing Kit Sequential Type GSX-S750】
・Each board uses 24 high-brightness LEDs. Comes with a dedicated turn signal relay. While manufactured to meet inspection pass/fail criteria, please note that the final decision on vehicle inspection pass/fail rests with the inspector.
・Incorporates the board into genuine turn signals, transforming them into LED sequential (chain-type) turn signals. One set for one vehicle.
Compatible models:
・Suzuki [SUZUKI]: Displacement 401cc-750cc: GSX-S750 (AL7/8)
Set contents/accessories:
・(1) LED Customizing Board Sequential Type Assy ……… 4 pcs
・ Specifications: Bulb adapter / 2-wire 120° parallel pin ・ Stopper / 2Holes
・(2) LED compatible dedicated turn signal relay Type S7P (#200819 C.F.POSH made) … 1 pc
Precautions:
*Regarding sequential turn signal specifications
*While manufactured to meet inspection pass/fail criteria (see (1) and (2) below), please note that the final decision on vehicle inspection pass/fail rests with the inspector.
*(1) Cycle 1sec ~ 0.5sec (60 to 120 times per minute / Product flashing frequency 73~75 times / minute)
* (Conforms to Notification Specifying Details of Safety Standards for Road Vehicles [2009.10.24]
(Section 2) Article 137 (Direction Indicators).
*(2) When flashing of light sources is caused by sequential illumination, the following conditions must be met:
* (Lighting equipment test for motorcycles, etc. (Regulation No. 50)
* 1. Each light source, once illuminated, must remain illuminated until the end of the ON cycle.
* 2. The sequential illumination of light sources must occur uniformly and progressively from the inside to the outer edge of the apparent surface.
* 3. A single continuous line without repetitive alternating changes in the vertical direction (e.g., no waves).
* 4. The change must be completed within 200ms after the start of the ON cycle.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware.
・Each board uses 24 high-brightness LEDs. Comes with a dedicated turn signal relay. While manufactured to meet inspection pass/fail criteria, please note that the final decision on vehicle inspection pass/fail rests with the inspector.
・Incorporates the board into genuine turn signals, transforming them into LED sequential (chain-type) turn signals. One set for one vehicle.
Compatible models:
・Suzuki [SUZUKI]: Displacement 401cc-750cc: GSX-S750 (AL7/8)
Set contents/accessories:
・(1) LED Customizing Board Sequential Type Assy ……… 4 pcs
・ Specifications: Bulb adapter / 2-wire 120° parallel pin ・ Stopper / 2Holes
・(2) LED compatible dedicated turn signal relay Type S7P (#200819 C.F.POSH made) … 1 pc
Precautions:
*Regarding sequential turn signal specifications
*While manufactured to meet inspection pass/fail criteria (see (1) and (2) below), please note that the final decision on vehicle inspection pass/fail rests with the inspector.
*(1) Cycle 1sec ~ 0.5sec (60 to 120 times per minute / Product flashing frequency 73~75 times / minute)
* (Conforms to Notification Specifying Details of Safety Standards for Road Vehicles [2009.10.24]
(Section 2) Article 137 (Direction Indicators).
*(2) When flashing of light sources is caused by sequential illumination, the following conditions must be met:
* (Lighting equipment test for motorcycles, etc. (Regulation No. 50)
* 1. Each light source, once illuminated, must remain illuminated until the end of the ON cycle.
* 2. The sequential illumination of light sources must occur uniformly and progressively from the inside to the outer edge of the apparent surface.
* 3. A single continuous line without repetitive alternating changes in the vertical direction (e.g., no waves).
* 4. The change must be completed within 200ms after the start of the ON cycle.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware.
適合車種の情報は現在登録されていません。
