LED Customizing Kit Sequential Type GSR750

【CF POSH 428980 LED Customizing Kit Sequential Type GSR750】
・Each board uses 24 high-brightness LEDs. Comes with a dedicated blinker relay. Although it is manufactured to meet the criteria for vehicle inspection conformity, please understand that the basic judgment of vehicle inspection conformity at present will be left to the vehicle inspector.
・Integrates the board into the genuine blinker, turning it into an LED sequential blinker. A set for one vehicle.
Compatible models:
・Suzuki: Engine displacement 401cc-750cc: GSR750 (AL3/4/5, ZAL4)
・Suzuki: Engine displacement 401cc-750cc: V-Strom650 (AL3/4/5/6)
・Suzuki: Engine displacement 401cc-750cc: SV650X ABS (XAL5)
Set contents/accessories:
・(1) LED customizing board sequential type Assy …… 4 pcs
・Specifications: Bulb adapter/2-wire 120° parallel pin ・ Stopper/2Holes
・(2) LED compatible dedicated blinker relay Type S7P (#200819 C.F.POSH made) … 1 pc
Notes:
*Regarding the specifications of sequential blinkers
*Although it is manufactured to meet the judgment criteria for vehicle inspection conformity (see (1) and (2) below), please understand that the basic judgment of vehicle inspection conformity at present will be left to the vehicle inspector.
*(1) Cycle: 1 sec to 0.5 sec (60 to 120 times per minute / product flash rate 73-75 times / minute)
* (Conforms to the "Ministerial Ordinance Specifying Details of Road Transport Vehicle Safety Standards" [October 24, 2009] (Section 2) Article 137 (Direction Indicator).)
*(2) When the light source flashes due to sequential illumination, the following conditions must be met:
* (Testing of lighting devices for motorcycles, etc. (Regulation No. 50))
* 1. Each light source, after its illumination, remains illuminated until the end of the ON cycle.
* 2. The sequential illumination of light sources occurs uniformly and progressively from the inside of the apparent surface towards the outer edge.
* 3. A single continuous line without repetitive alternating changes in the vertical direction (e.g., no waves).
* 4. The variation ends within 200ms after the start of the ON cycle.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.