1
/
of
4
Hot Grips Heavy Duty Built-in 4Sn 120mm/φ33.6
Hot Grips Heavy Duty Built-in 4Sn 120mm/φ33.6
SKU:d-10154
Regular price
¥8,667
Regular price
¥14,300
Sale price
¥8,667
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Ships in 2-3 business days
配送方法/参考送料:Courier delivery: shipping fee ¥698
87
points to be awarded
Couldn't load pickup availability
【Daytona 10154 HOT GRIP Heavy Duty Built-in 4Sn 120mm/φ33.6 Grip Hot Grip Rapid Quick Heat Heater Heating Cold Protection Rapid Heating Function Winter】
・Despite its slim profile, it features heating. The switch is built into the grip, and the grip diameter is close to genuine, giving it a clean look. ・Equipped with a "Rapid Quick Heat" function that heats up immediately when switched on. ・The resin inner is resistant to heat loss and twisting, and the film heater is designed to prevent wire breakage.
Specifications: ・For φ22.2mm handlebars, 12V vehicles only ・Total grip length: 120mm, through-end type (bar end can be attached) ・Grip inner diameter (right): φ24.4mm (left): φ21.2mm ・Grip outer diameter: φ33.6 ・Equipped with a rapid heating function for up to 4 minutes (quick heat function). ・Can be installed on vehicles equipped with H.L.D system. Always start the engine & H.I.D system before turning on the power. 【4 levels of temperature adjustment】
Outside temperature 20℃ LEVEL1: 50℃ (12W) White LED / LEVEL2: 70℃ (19W) Blue LED / LEVEL3: 90℃ (28W) Yellow LED / LEVEL4: 97℃ (32W) Orange LED
・Size: Total length 120mm / Grip outer diameter φ33.6
Precautions: ・Riding at LEVEL3 & 4 may lead to battery drain or low-temperature burns. Please use it for rapid heating only. ・The temperature graph shows measurement results indoors. Please refer to it as a reference value. ・If there are anti-rotation features (ribs) on the throttle sleeve, it is necessary to shave them off. Even if there are no anti-rotation features on the sleeve, please shave it off to match the inner diameter of the grip. ・Cannot be used with FLAT throttle sleeves. ・Be sure to use the separately sold adhesive specifically for hot grips. ・Cannot be used with early model Majesties. ・Cannot be used with vehicles with insufficient power generation capacity or battery-less vehicles. ・If installed on vehicles with small battery capacity and generator power generation capacity, it may cause battery problems due to insufficient charging. ・Hot grips are consumables. The grip portion will wear out. Please replace them regularly.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.
・Despite its slim profile, it features heating. The switch is built into the grip, and the grip diameter is close to genuine, giving it a clean look. ・Equipped with a "Rapid Quick Heat" function that heats up immediately when switched on. ・The resin inner is resistant to heat loss and twisting, and the film heater is designed to prevent wire breakage.
Specifications: ・For φ22.2mm handlebars, 12V vehicles only ・Total grip length: 120mm, through-end type (bar end can be attached) ・Grip inner diameter (right): φ24.4mm (left): φ21.2mm ・Grip outer diameter: φ33.6 ・Equipped with a rapid heating function for up to 4 minutes (quick heat function). ・Can be installed on vehicles equipped with H.L.D system. Always start the engine & H.I.D system before turning on the power. 【4 levels of temperature adjustment】
Outside temperature 20℃ LEVEL1: 50℃ (12W) White LED / LEVEL2: 70℃ (19W) Blue LED / LEVEL3: 90℃ (28W) Yellow LED / LEVEL4: 97℃ (32W) Orange LED
・Size: Total length 120mm / Grip outer diameter φ33.6
Precautions: ・Riding at LEVEL3 & 4 may lead to battery drain or low-temperature burns. Please use it for rapid heating only. ・The temperature graph shows measurement results indoors. Please refer to it as a reference value. ・If there are anti-rotation features (ribs) on the throttle sleeve, it is necessary to shave them off. Even if there are no anti-rotation features on the sleeve, please shave it off to match the inner diameter of the grip. ・Cannot be used with FLAT throttle sleeves. ・Be sure to use the separately sold adhesive specifically for hot grips. ・Cannot be used with early model Majesties. ・Cannot be used with vehicles with insufficient power generation capacity or battery-less vehicles. ・If installed on vehicles with small battery capacity and generator power generation capacity, it may cause battery problems due to insufficient charging. ・Hot grips are consumables. The grip portion will wear out. Please replace them regularly.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.
適合車種の情報は現在登録されていません。
