High-Visibility Stick-On Mirror Blue Kawasaki 2

■A wide-angle mirror that simply adheres to the genuine mirror. By adopting a mirror with a curvature of R1000, blind spots are reduced and the rear view is expanded. The anti-glare mirror reduces glare from the headlights of following vehicles during night driving. Strong double-sided tape reduces mirror resonance and provides a clear view. The mirror surface is laser-marked with Daytona Hi-Viz Mirror.
Specifications
New safety standard compliant size
Conforms to genuine mirror ECE certification number "E13 005036".
Even for vehicles not confirmed by Daytona, it can be used if the ECE certification number stated on the genuine mirror housing matches.
If it does not fit the vehicle side, warming the edge with a hairdryer may make it easier to fit.
[Installation Procedure]
(1) Temporarily apply to the mirror to check the shape and mounting position.
(2) Wipe off dirt and oil from the mounting surface with a degreasing agent.
(3) After confirming that the mounting surface is dry, peel off the release paper and apply it along the edge.
(4) Press firmly with light force to adhere it securely.
Type: Kawasaki 2
Color: Blue
Daytona Confirmed Vehicles
Ninja H2 SX/SE ('18~'19)
*Ninja H2 SX/SE ('22~'23) is not compatible as the rear radar sensor cannot be used.
Ninja ZX-10R/RR/SE ('11~'24)
Notes
*Due to the low height of the edge from the mirror surface of the genuine mirror, the attached mirror will protrude.
*Since it is adhered with strong adhesive force, it cannot be peeled off. Please note that forcibly peeling it off may break this product and the genuine mirror.
*As it is a glass product, please handle it with sufficient care to avoid injuries or breakage.
*When installing in low temperatures, the adhesive strength of the double-sided tape will decrease, so it is recommended to warm it lightly with a hairdryer before working.
*Until the tape is completely adhered (takes about 24 hours), avoid getting it wet or subjecting it to strong vibrations.
*Due to manufacturing variations in the vehicle side mirror, there may be a slight misalignment in shape with this product. If misalignment occurs, applying a black oil-based marker along the frame of the vehicle side mirror will make the gap less noticeable.
*This product is a wide-angle mirror type. The sense of distance will differ from the genuine mirror. Please drive carefully until you get used to it.
*Although the edge of the mirror is smooth, please be careful not to cut your hands.
*Do not use chemical agents for mirrors.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.