NISSIN Clutch Master Cylinder 14mm Silver/Clear

【Daytona 61748 NISSIN Clutch Master Cylinder 14mm Silver/Clear Daytona 61748】
14mm Silver/Clear
Best match for big bikes with hydraulic clutches. Change together with the brake side to enhance the custom finish.
● For φ22.2 handlebars.
● Standard lever type only. Short lever not available.
● Lever adjustment is 5-stage adjustable.
● Includes clutch switch (110 type 3-pin female coupler type), aluminum tank stay x 1, mirror holder (M10 x P1.25 right-hand thread) x 1. Reservoir tank hose length = 55mm, φ32 x P4.0.
● Banjo bolt (M10 x P1.25) sold separately.
● Clutch hose outlet direction and angle differ from stock. The genuine clutch hose may be usable depending on the model.
● Always replace gaskets with new ones. Two are required for a single banjo.
● For vehicles with flat terminals for the vehicle-side switch harness, the terminal shape does not match, so a separately sold clutch switch harness (29968) must be installed simultaneously.
*Depending on your vehicle, there may be lever adjuster positions where the lever hits the grip before the necessary hydraulic pressure is generated, making it unusable.
Please adjust the lever adjuster and use it in a position where the clutch fully disengages and the lever does not touch the grip.
If you cannot adjust it sufficiently, please use the separately sold 4-stage adjustable lever (Buff Clear: Part No. 28826) or (Black: Part No. 27355).
*Do not use silicone-based brake fluid.
*Designed specifically for clutches, cannot be used as a left brake.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.