NISSIN Nissin Clutch Master Cylinder 5/8 inch Gold/Clear

[Daytona 61752 NISSIN Clutch Master Cylinder 5/8 inch Gold/Clear Daytona 61752]
5/8 inch Gold/Clear
Best match for big bikes with hydraulic clutches. Improve custom completeness by changing it with the brake side.
● For φ22.2 handlebars.
● Standard lever type only. No short lever setting.
● Lever adjustability: 5 levels.
● Includes clutch switch (110 type 3-pin female coupler type), aluminum tank stay x 1, mirror holder (M10 x P1.25 standard thread) x 1.
Reservoir tank hose length = 55mm, φ32 x P4.0.
● Banjo bolt (M10 x P1.25) sold separately.
● The clutch hose outlet direction and angle are different from the standard. The genuine clutch hose may be usable depending on the vehicle model.
● Always replace gaskets with new ones. Two are required for a single banjo.
● For vehicles where the vehicle-side switch harness has flat terminals, the terminal shape is not compatible, so the separately sold clutch switch harness (29968) must be installed simultaneously.
*Depending on the vehicle you are using, there may be lever adjuster positions where the lever hits the grip before the necessary hydraulic pressure is generated, making it unusable.
Please adjust the lever adjuster and use it at a position where the clutch is fully disengaged and the lever does not contact the grip.
If you cannot adjust it sufficiently, please use the separately sold 4-step adjustable lever (Buff Clear: Part No. 28826) or (Black: Part No. 27355).
*Do not use silicone-based brake fluid.
*Designed exclusively for clutches, cannot be used as a left-side brake.
*The image is for illustrative purposes only, and the design and specifications of the products shown may change without notice. Please understand.