NISSIN Nissin Clutch Master Cylinder 5/8 inch Black/Black

[Daytona 61755 NISSIN Clutch Master Cylinder 5/8 inch Black/Black Daytona 61755]
5/8 inch Black/Black
Best match for big bikes with hydraulic clutches. Change it together with the brake side to improve the completeness of your custom build.
●For φ22.2 handlebars.
●Standard lever type only. Short lever not available.
●Lever adjustment is 5-step adjustable.
●Includes clutch switch (110 type 3-pin female coupler type), aluminum tank stay x 1, mirror holder (M10 x P1.25 standard thread) x 1.
Reservoir tank hose length = 55mm, φ32 x P4.0.
●Banjo bolt (M10 x P1.25) is sold separately.
●The direction and angle of the clutch hose outlet are different from the stock. Depending on the model, the genuine clutch hose may be usable.
●Always replace gaskets with new ones. Two are required for a single banjo.
●For vehicles where the vehicle-side switch harness has flat terminals, the terminal shape is not compatible, so the separately sold clutch switch harness (29968) must be installed simultaneously.
*Depending on the vehicle you are using, there may be a lever adjuster position where the lever hits the grip before the necessary hydraulic pressure is generated, making it unusable.
Adjust the lever adjuster and use it at a position where the clutch is fully disengaged and the lever does not contact the grip.
If you cannot adjust it sufficiently, please use the separately sold 4-step adjustable lever (Buff Clear: Part No. 28826) or (Black: Part No. 27355).
*Do not use silicone-based brake fluid.
*Cannot be used as a left-side brake as it is designed specifically for clutches.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware.