NISSIN Horizontal Brake Master Cylinder 11mm Black/Black

【Daytona 78594 NISSIN Brake Master Cylinder Horizontal Type 11mm Black/Black】
Body color: Black Lever: Black Compatible handle: Φ22.2
Size: 11mm Specifications:
・A classic custom master cylinder that offers a wide range of color selections and improved lever adjustment!
・A classic horizontal brake master cylinder with a separate tank. The wide lineup, which can be selected according to the master cylinder piston diameter and color of normal vehicles, expands the range of customization!
・The clamp holder has a mirror hole (M10 x P1.25 positive screw included).
・Exclusively for handle outer diameter φ22.2. A reliable bolt-on design that also includes an aluminum tank stay and a brake switch (flat terminal 2-pole type).
・Lever adjustment is possible in 6 steps.
・Reservoir tank hose length = 70mm.
・Banjo bolt (M10 x P1.25) is sold separately.
・The direction and angle of the brake hose outlet are different from the normal one.
・Always replace the gasket with a new one. Three gaskets are required for a double banjo and two for a single banjo.
*Using an RC30 type lever will cause the cylinder to remain pressed, leading to vapor lock and other problems. Never use any lever other than the specified one.
*Do not use silicone-based DOT5 (BF5) brake fluid.
*Regarding brake fluid: Brake fluid absorbs moisture from the air and deteriorates with long-term use. (Even when stored, fluid deterioration progresses.) If the water content in the brake fluid increases, it becomes easier to boil due to the heat during braking, corrodes parts in the hydraulic system, and may lead to reduced brake or clutch performance or unexpected problems. Regular replacement every two years is required under normal use. If significant deterioration is observed, early replacement of the brake fluid is necessary.
*Depending on the combination with your caliper, there may be lever adjuster positions where the lever hits the grip before the required brake fluid pressure is generated, making it unusable. Adjust the lever adjuster to a position where the brake works sufficiently and the lever does not touch the grip. If it cannot be adjusted, please use the separately sold 4-step adjustable lever (buff clear 23319) or (black 27354).
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.