Lowering Link Rod for GSR750 ABS L3/L4/L5

[Daytona 78926 Lowering Link Rod for GSR750 ABS L3/L4/L5]
Compatible models/years: SUZUKI GSR750ABS L3/L4/L5/2013-2015 Size: Approximately 20mm drop Color: Steel, black painted finish
Compatible with genuine side stands. Specifications:
・"My feet can reach the ground when I get on the bike" - what a relief!
・Daytona's know-how was applied, and repeated link ratio calculations and actual driving tests were performed for each model! It improves maneuverability and foot reach on road riding without compromising stability. Since it is a dedicated product for each model (bolt-on design), you only need to replace it with the genuine link rod (or link plate)!
・Link ratio calculations and actual driving tests have been repeatedly performed for each model during development. Generally, increasing the lowering amount compromises handling stability, so please absolutely refrain from using this product in conjunction with other lowering parts that would increase the specified lowering amount. Also, if parts such as the muffler, rear suspension, or tires have been replaced, please be sure to check the clearance of each part when the rear suspension is at full stroke, and discontinue use of this product if sufficient clearance cannot be obtained.
・The lowering amount is a reference value for a normal vehicle (unloaded). Please note that it may vary depending on whether vehicle accessory parts that increase the initial load around the rear are installed, and the condition of the rear suspension (including settings, deterioration, etc.).
・Due to the nature of the product, the angle of the vehicle when parked will be slightly upright after installation. Always turn the handlebars to the left and park with the vehicle leaning to the left. Carefully check the slope of the road surface and surrounding conditions, and never park in a location where the vehicle might lean to the right. Particular caution is required when a rear BOX is installed.
・For installation, please be sure to have the service manual specified by the vehicle manufacturer and the specified tools (commercially available equivalents are also acceptable).
・"Rear Lowering Link Rod" is the product name. Some products may have a different shape.
*The image is for illustrative purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.