Fuel filter, non-disassembling, paper filtration type, φ6.5

[Daytona 91614 Fuel Filter, Non-Disassemblable Paper Filtration Type, φ6.5]
Size: φ6.5, Insertion Part Inner Diameter: φ4.0
Insertion Part Outer Diameter: φ6.5
Maximum Outer Diameter: φ30.5
Overall Length: 57.3mm
Compatible Hose Inner Diameter: φ6.0 to φ6.5 Type: Paper Filtration Type Specifications:
・Paper type with an emphasis on filtration performance!
・Due to the emphasis on filtration performance, flow resistance is high. It is necessary to check the motorcycle's required gasoline flow rate.
*The maximum outer diameter is the outer diameter of the main body's joint part.
*The overall length includes the insertion part.
*The compatible hose diameter is merely a guide.
*Non-disassemblable filters should be replaced when clogged with dirt. If left unreplaced, debris will block the flow path and the gasoline flow rate will become insufficient, so frequent checks are necessary. Also, consider the installation direction to prevent such situations.
*Cannot be used with large-bore carburetors such as FCR. Using it will prevent a sufficient amount of gasoline from being supplied to the carburetor.
*Since it is a resin product, it is not resistant to heat. Install it in a location not affected by heat from the engine, etc. Heat may cause deformation. Also, internal air expansion may hinder flow.
*The gasoline inflow path is determined for each product. Please check before installation.
*Insert the hose and secure it firmly with a band. Insecure fastening can lead to serious accidents such as gasoline leakage and fire.
*The image is for illustration purposes only, and the design and specifications of the products shown may be changed without prior notice. Please be aware of this.