Fuel filter, non-disassembling, paper filtration type, φ8

[Daytona 91615 Fuel Filter, Non-Disassemblable Paper Filtration Type, φ8]
Size: φ8.0 Insertion part inner diameter: φ5.0
Insertion part outer diameter: φ8.0
Maximum outer diameter: φ30.5
Overall length: 57.3mm
Compatible hose inner diameter: φ7.5～φ8.0 Type: Paper filtration type Specifications:
・Paper type with an emphasis on filtration capacity!
・Due to the emphasis on filtration capacity, there is significant resistance to flow. It is necessary to check the motorcycle's required gasoline flow rate.
*The maximum outer diameter is the outer diameter of the joint part of the main body.
*The overall length includes the insertion part.
*The compatible hose diameter is merely a guideline.
*Non-disassemblable filters should be replaced when clogged with dirt. If left unreplaced, debris will block the flow path, and the gasoline flow rate will become insufficient, so frequent checks are necessary. Also, consider the installation orientation to prevent such situations.
*Cannot be used with large-bore carburetors such as FCR. If used, a sufficient amount of gasoline will not be supplied to the carburetor.
*As it is a resin product, it is not resistant to heat. Install it in a location not affected by heat from the engine or other sources. Heat may cause deformation. Also, the internal air expansion may hinder flow.
*The gasoline inflow path is determined for each product. Please check before installation.
*Insert the hose and secure it firmly with a band. Insecure fastening may lead to gasoline leakage and serious accidents such as fires.
*The image is for illustrative purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.