Lowdown Front Fork Springs SR400 (85-)

[Daytona 95034 Lowering Front Fork Springs for SR400 (85-)]
Achieving a horizontal line from the tank to the seat.
These lowering front fork springs have been refined through repeated real-world testing to achieve optimal spring characteristics. They allow for a nearly horizontal bike posture without significantly protruding the front forks from the top bridge. While lowering the bike by approximately 25-30mm, they still maintain the necessary maximum load. The springs feature an unequal pitch design, providing a comfortable ride with good initial movement in the stroke. Their characteristic of firmly holding up at deeper compression also makes them suitable for vehicles with upgraded front brakes.
●Free length: 485mm, Outer diameter: φ24.8
●Includes a 17mm hex tool, a special tool required for front fork disassembly.
*For model years '85-'00: Approximately 30mm lower
*For model years '01-: Approximately 25mm lower (The amount of lowering is less because the stock springs already provide a good amount of sag with no load)
*Images are for illustrative purposes only, and the design and specifications of the products shown are subject to change without notice. Thank you for your understanding.