[Outlet] GIVI DLM46A Aluminum Monokey Case

[Daytona 95036 GIVI DLM46A Aluminum Monokey Case] TREKKER DOLOMITI series aluminum monokey case.
The DLM46A is exclusively for monokey top cases. It can be used as a top case when combined with a monokey base (without electrical contacts).
Equipped as standard with anti-shock inner mat, security key, and key cylinder protection cap.
Weight of main unit: DLM46A: 5.1 kg
Depth x Width x Height: DLM46A: 410 x 460 x 340 (mm)
Maximum load capacity: 10 kg *Daytona recommends 3 kg or less for handling considerations.
*For installation, a separately sold vehicle-specific fitting + monokey base (without electrical contacts) is required.
*Maximum load capacity (= MAX total weight of contents inside the case) is 10 kg. Daytona recommends using it with 3 kg or less for handling considerations. If the fitting has a load limit, do not use it with a load exceeding that specified value.
*It cannot hold two full-face helmets. The image shows a jet type, but depending on the size, two may not fit.
*The case body is made of aluminum. It cannot be attached to a monokey base with stop lamp contacts.
*Although designed with waterproofing in mind, it is not completely waterproof.
*Due to the material, manufacturing method, and individual product differences, the finish quality will be similar to the product you receive.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.