Forged Aluminum Kickstand CRF250RALLY

[ZETA Dirtfreak ZE56-8029 Forged Aluminum Kickstand CRF250RALLY Side Stand for Lowered Vehicles]
・Primarily offers a short type, 25mm shorter than the stock stand for lowered vehicles. *1
・Prevents instability caused by changes in vehicle height and is set to a length that allows safe use even on rough terrain.
・The detachable tip can be replaced with an optional tip to adjust the height for standard or high-lift vehicles. *2
・Made from forged A2014 for strength and durability.
*1 Some vehicles also have settings for high-lift and standard vehicles.
*2 The lean angle varies depending on the vehicle height. If the tip length is not suitable, please refer to the optional tip conversion chart below and replace the tip.
Compatible models:
HONDA:
・CRF250RALLY / '17-'19
*When assembling the tip, be sure to apply threadlocker to the tip mounting bolt.
*If you are concerned about the tip rotating, apply retaining compound to the joint between the shaft and the tip.
*Applying adhesive to the joint will make subsequent tip replacement difficult, so please take this measure only if necessary.
*Images are for illustration purposes only. Product design and specifications are subject to change without notice. Thank you for your understanding.