Forged Aluminum Kickstand -25mm CRF250L(S)/Rally(S)

【ZETA ZE56-8039 Forged Aluminum Kickstand -25mm for CRF250L(S)/RALLY(S) Lowered Vehicles Short Type Dirtfreak】
We mainly offer a short type that is 25mm shorter than the stock kickstand for lowered vehicles.
This prevents the vehicle from becoming unstable due to changes in ride height, and the length is set to ensure safe use even on rough roads.
The removable tip can be exchanged with an optional tip to adjust the height for standard or high-lift vehicles.
Made from forged A2014, ensuring strength and durability.
Compatible models
HONDA
・CRF250L(S)/RALLY(S) (21-)
Specifications
Size: -25mm compared to stock length
*For TRICKER & WR250X, although -25mm is stated in the pull-down menu, it will be the same height as the stock kickstand.
*The +25mm for SEROW250 is convenient when lifting the vehicle with a DRC rear suspension link kit or similar.
*Some vehicles have settings for high-lift vehicles and standard vehicles.
*The lean angle varies depending on the ride height. If the tip length is not suitable, please refer to the optional tip conversion chart below and replace the tip.
*We recommend applying thread lock to the threaded and mating parts.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.