R&U Products 128mm Raw Flanders Style Risers

【R&U Products RE-620 128mm Raw Flanders Style Risers Handlebar Peripherals Parts】
■Product Description
FLANDERS Style Risers, Raw, 128mm
These are original steel risers designed by sampling the characteristic rounded shape of FLANDERS risers, and are made to match with Glide Risers and Springer top trees.
The height is 128mm (approximately 5 inches).
*This is the height from the seating surface of the lower base to the flat part of the top surface.
When measured from the center of the actual handle, it will be a few millimeters higher.
This is a set of raw risers made from iron casting in Japan, without any surface treatment.
(*They are not chrome-plated, so they will rust if left as is.)
Please use them as a custom base for painting black, intentionally rusting to convert to black rust, or for length adjustment and welding.
*The surface where the tool for tightening fits is securely ensured so that the tool bites firmly, allowing for proper torque tightening.
Additionally, the seating surface is designed to be almost the same size as the diameter of the solid mounts often used with glide risers, which makes the solid mount disappear when installed, resulting in a smarter fit.
(This is similar to Pauly risers.)
Since the seating surface diameter is approximately 36.9mm, it can also be used in combination with Springer top trees without ears.
(Risers from other companies with smaller seating surface diameters could not be used in combination because the riser would fall into the hole of the top tree.)
The suitable riser bolts are 1/2-20 fine thread.
Vehicles already using fine thread bolts can use them as is.

■Notes on images
*The images are for illustration purposes only. They may include products of different sizes or colors. Product design and specifications are subject to change without notice. Please understand.

Precautions
*Top tightening bolts are not included.
(Please use 5/16-24x1” for the top bolt size.)
*If you are using 1/2-13 coarse thread bolts, please purchase separate 1/2-20 fine thread riser bolts.
*Please note that when combined with 39mm triples from 2004 onwards, the seating surface diameter is larger than the floating design of the triple, causing it to protrude.