R&U Products Raw/FLANDERS Style Riser Set

【R&U Products RU10-0001N Unfinished/FLANDERS Style Riser Set Handle Peripheral Parts】
■Product Description
R&U FLANDERS Style Riser Set, Raw Finish
This is an R&U original steel riser designed by sampling the characteristic rounded shape of FLANDERS,
and is also made to match with glide risers and springer top tees.
The height is quite low at 1-1/4 inches (approx. 32mm).
*This is the height from the seating surface of the lower base to the flat top surface.
If measured at the center of the actual handlebars, it would be a few millimeters higher.
This riser set is made of cast iron and is unfinished, stopping at the polishing stage.
(*Since it has not been chrome-plated, it will rust if left as is.)
Please use it as a custom base for painting black, intentionally rusting it to blacken it, or adjusting its length.
*The surface where the tool for tightening the riser engages is sufficiently secured so that the tool bites firmly, allowing you to tighten it with proper torque.
In addition, the seating surface is designed to be almost the same size as the diameter of a solid mount often used with glide risers, which makes the solid mount disappear when installed, resulting in a smarter fit.
(It is similar to risers made by Paughco.)
Since the seating surface diameter is approximately 36.9mm,
it can also be used in combination with a springer top tee without ears.
(Risers from other companies with smaller seating surface diameters could not be used in combination because the riser would fall into the hole of the top tee.)
The compatible riser bolts are 1/2-20 fine thread.
Vehicles already using fine thread bolts can use them as is.
*If you are using 1/2-13 coarse thread bolts, please purchase 1/2-20 fine thread riser bolts separately.
*Please note that when combined with 39mm triples from 2004 onwards, the seating surface diameter is larger than the raised design of the triple, so it will protrude.

■Image Precautions
*Images are for illustration purposes only. They include products of different sizes and colors. Product designs and specifications are subject to change without notice. Please be aware of this.

Notes
*Top tightening bolts are not included.
(Please use a 5/16-24x1” top bolt.)