Disc Inner Tube Crab Brembo 2P Chrome Plated Monkey Gorilla

【G-Craft 33175 Disc Inner Tube Brembo Crab 2P Chrome Plated Monkey Gorilla】
By replacing the stock fork, you can install a Brembo Crab caliper on the front.
Can be fitted with up to 8-inch 3.5J wheels.
Includes a dedicated 9.5mm disc spacer.
Exclusively for G-Craft's 39028 front disc hub.
For NSR50/80 rear disc rotor (φ160)
This product can be installed on 6V and 12V Monkey/Gorilla vehicles.
However, when installing on a 4L Monkey (Z50J/Z50J1 Z50-1000001 to 1028999 / Z50-1100001 to 1195595), or when installing simultaneously with G-Craft part number 33148 fork boot mounting collar, the fork boot will interfere with the disc rotor.
Compatible models
6V/12V Monkey/Gorilla
Surface treatment: Chrome plating finish
Material: Steel
Precautions
*When installing 8-inch 3.5J wheels, processing such as削る (grinding) the caliper may be required.
*The caliper to be installed with this product is the large piston type of Brembo Crab.
*8-inch 4.0J wheels cannot be used.
*Small pistons cannot be installed.
*Shift Up calipers cannot be installed due to interference with the outer circumference of the rotor.
*This product is designed with the tire center offset by 1mm towards the meter gear to prevent interference between the caliper and wheel.
*Floating disc rotors will interfere with the floating pins, so processing such as grinding the brake pads is required.
*Aftermarket upper spring holders may not fit.
*The image is for illustration purposes only. The design and specifications of the products shown may change without prior notice. Please be aware of this.