Disc Inner Tube for Crab Brembo 2P, Chrome Plated, for Monkey Gorilla

【G-Craft 33181 Disc Inner Tube for Crab Brembo 2P Caliper, Chrome Plated, Monkey Gorilla】
25mm shorter than stock Monkey length.
By replacing the stock fork, a Crab Brembo caliper can be installed on the front.
Up to 8-inch 3.5J wheels can be installed.
Includes a dedicated 9.5mm disc spacer.
For G-Craft 39028 front disc hub only.
For NSR50/80 rear disc rotor (φ160)
This product can be installed on 6V and 12V Monkey/Gorilla vehicles.
However, if installed on a 4L Monkey (Z50J/Z50J1 Z50-1000001～1028999/Z50-1100001～1195595), or if installed simultaneously with G-Craft part number 33148 fork boot mounting collar, the fork boot will interfere with the disc rotor.
Compatible models
6V/12V Monkey/Gorilla
Surface treatment: Chrome plated finish
Material: Steel
Notes
*When installing 8-inch 3.5J wheels, processing such as削る (shaving) the caliper may be required.
*The caliper to be installed with this product is the large piston type of Crab Brembo.
*8-inch 4.0J wheels cannot be used.
*Small piston calipers cannot be installed.
*Shift Up calipers cannot be installed due to interference with the outer circumference of the rotor.
*This product is designed with the tire center offset by 1mm towards the meter gear side to prevent interference between the caliper and the wheel.
*Floating disc rotors will interfere with the floating pins, so processing such as削る (shaving) the brake pads is required.
*Images are for illustration purposes only. The design and specifications of the products shown are subject to change without prior notice. Please understand.