4.0J Wide Wheel, 8-Hole Type, Silver Anodized, 8 Inch, 1 Wheel

【G-Craft 39313 4.0J Wide Wheel, 8-Hole Type, Silver Alumite, 8-inch, 1 Wheel】
By installing 4.0J on an 8-inch wheel, you can achieve a fat wheel setup.
This is the maximum size that can be installed with a stock stem and stock swingarm.
However, it requires a 32080 dust seal on the front fork, a 4mm front offset sprocket such as 36022, and a 39403 offset sprocket spacer.
●Recommended tire size: 120-70-8 (B77)
●Recommended inner tube size: 3.5-4.0-8
●Rim width: 114mm
●About valve hole position:
For drum brakes, the valve hole is on the brake panel side for both front and rear.
For disc brakes, the valve hole is on the sprocket side for both front and rear.
Type: 8 holes
Surface treatment: Silver alumite finish
Size: 8 inches
Material: A5052 material
Quantity: 1 wheel
Precautions
*The rim shape may differ between the left and right sides. This is due to manufacturing variations and is not a defect. Please be aware of this in advance.
*When installing 4.0J, the tire may interfere with the chain cover. Please shave off the interfering part of the chain cover.
*Due to manufacturing tolerances on the vehicle side, the tire center may be offset by approximately 1mm-2mm when the wheel is installed (mainly on the front side), but this does not affect use.
*The image is for illustrative purposes only, and the design and specifications of the product shown are subject to change without notice. Please be aware of this.