1
/
of
4
Swingarm, Twin Shock, Standard, With Stabilizer, Buff, +10cm, Monkey/Gorilla
Swingarm, Twin Shock, Standard, With Stabilizer, Buff, +10cm, Monkey/Gorilla
SKU:gcr-90002
Regular price
¥44,258
Regular price
¥50,160
Sale price
¥44,258
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
443
points to be awarded
Couldn't load pickup availability
【G-Craft 90002 Swingarm Twin Shock Standard with Stabilizer Buff +10cm Monkey Gorilla】
Monkey Swingarm STD Twin +10cm with Stabilizer
The Monkey swingarm standard width (for Monkey hubs) is a swingarm manufactured with the same width as the Monkey's genuine swingarm (width 167-170mm).
You can use the genuine Monkey hub as is, or use the 39053 rear disc hub.
This swingarm is compatible with both drum and disc brakes.
It is G-Craft's most popular swingarm due to its wide range of length options.
The triple square pipe swingarm, which uses a particularly strong "H-beam cross-section," is supported by over 80% of users who choose 16cm or longer.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +10cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (pipe shape specific)
(2) Twin shock suspension mounting bolts 1 set
(3) Drum brake rod 1 (depending on swingarm length)
*Not included with +0cm, +2cm.
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J (If converting to disc with 8-inch 4.0J, please use dedicated rear hub part number 39099)
*Up to 10-inch 3.5J can be installed (requires +4cm or more)
*Only triple square pipes have chain sliders on the bottom as well.
*The Standard Stabilizer Type 2 has a main pipe that is a thick pipe measuring 42mm x 32mm. (The regular Standard Stabilizer type has a thin pipe specification of 32mm x 32mm)
*Depending on individual differences in the vehicle, the brake switch stay may interfere. In such cases, bend the brake switch stay to ensure the necessary clearance for operation before installation.
*The axle shaft uses the genuine Monkey part (overall length 210mm).
*Triple Square and Triple Square Mini are equipped with bearings at the pivot as standard.
*For Triple Square +4cm, stabilizer addition processing is not possible (due to interference between the center pipe and the frame).
*The image is for illustration purposes, and the design and specifications of the products shown may change without notice. Please understand.
Monkey Swingarm STD Twin +10cm with Stabilizer
The Monkey swingarm standard width (for Monkey hubs) is a swingarm manufactured with the same width as the Monkey's genuine swingarm (width 167-170mm).
You can use the genuine Monkey hub as is, or use the 39053 rear disc hub.
This swingarm is compatible with both drum and disc brakes.
It is G-Craft's most popular swingarm due to its wide range of length options.
The triple square pipe swingarm, which uses a particularly strong "H-beam cross-section," is supported by over 80% of users who choose 16cm or longer.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +10cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (pipe shape specific)
(2) Twin shock suspension mounting bolts 1 set
(3) Drum brake rod 1 (depending on swingarm length)
*Not included with +0cm, +2cm.
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J (If converting to disc with 8-inch 4.0J, please use dedicated rear hub part number 39099)
*Up to 10-inch 3.5J can be installed (requires +4cm or more)
*Only triple square pipes have chain sliders on the bottom as well.
*The Standard Stabilizer Type 2 has a main pipe that is a thick pipe measuring 42mm x 32mm. (The regular Standard Stabilizer type has a thin pipe specification of 32mm x 32mm)
*Depending on individual differences in the vehicle, the brake switch stay may interfere. In such cases, bend the brake switch stay to ensure the necessary clearance for operation before installation.
*The axle shaft uses the genuine Monkey part (overall length 210mm).
*Triple Square and Triple Square Mini are equipped with bearings at the pivot as standard.
*For Triple Square +4cm, stabilizer addition processing is not possible (due to interference between the center pipe and the frame).
*The image is for illustration purposes, and the design and specifications of the products shown may change without notice. Please understand.
適合車種の情報は現在登録されていません。
