1
/
of
4
Wide Swingarm, Twin Shock, Standard, No Stabilizer, Buffed, +16cm, Monkey Gorilla
Wide Swingarm, Twin Shock, Standard, No Stabilizer, Buffed, +16cm, Monkey Gorilla
SKU:gcr-90035
Regular price
¥39,600
Regular price
¥44,880
Sale price
¥39,600
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
396
points to be awarded
Couldn't load pickup availability
【G-Craft 90035 Wide Swingarm Twin Shock Standard No Stabilizer Buff +16cm Monkey Gorilla】
Monkey Wide Swingarm STD Twin +16cm No Stabilizer
The wide swingarm (for wide hub) for the Monkey is a swingarm manufactured with a width of 187-190mm.
It comes with a special collar so that the genuine Monkey hub can be used.
Caliper support 33192 can be used.
The triple square pipe swingarm, which uses a strong "I-beam cross-section," is a pipe that boasts over 80% support from users who choose 16cm or more.
When installing 8-4.0J or 10-4.0J, a G-Craft 7mm offset sprocket is required for the front, and a G-Craft 8mm sprocket spacer is required for the rear.
Compatible models
Monkey, Gorilla
Surface treatment: Buffed finish
Size: +16cm
Material: 7N01, A5083 material used
Accessories
(1) Chain tensioner block 1 set (specific to each pipe shape)
(2) Twin shock mount bolt 1 set
(3) Drum brake rod 1 (depending on swingarm length)
(4) Axle shaft 230mm 1 (repair part number 38061)
(5) Axle collar 10mm 2 (repair part number 68134/1 piece)
(6) Axle nut M12 1 (repair part number 38001)
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J, and up to 10-inch 4.0J can be installed (for 10-inch, +4cm or more is required).
*Only triple square pipes have chain sliders on the bottom as well.
*The Standard with Stabilizer Type 2 has a main pipe of 42mm x 32mm (thick pipe). (The regular Standard with Stabilizer has a 32mm x 32mm thin pipe specification).
*The rear shocks are attached in a "V" shape, but there is no problem with use.
*Due to individual differences in the vehicle, the brake switch stay may interfere. In such cases, bend the brake switch stay and install it after securing the necessary clearance for operation.
*Triple Square and Triple Square Mini come standard with pivot bearing specifications.
*The images are for illustration purposes, and the design and specifications of the products shown may change without notice. Please be aware.
Monkey Wide Swingarm STD Twin +16cm No Stabilizer
The wide swingarm (for wide hub) for the Monkey is a swingarm manufactured with a width of 187-190mm.
It comes with a special collar so that the genuine Monkey hub can be used.
Caliper support 33192 can be used.
The triple square pipe swingarm, which uses a strong "I-beam cross-section," is a pipe that boasts over 80% support from users who choose 16cm or more.
When installing 8-4.0J or 10-4.0J, a G-Craft 7mm offset sprocket is required for the front, and a G-Craft 8mm sprocket spacer is required for the rear.
Compatible models
Monkey, Gorilla
Surface treatment: Buffed finish
Size: +16cm
Material: 7N01, A5083 material used
Accessories
(1) Chain tensioner block 1 set (specific to each pipe shape)
(2) Twin shock mount bolt 1 set
(3) Drum brake rod 1 (depending on swingarm length)
(4) Axle shaft 230mm 1 (repair part number 38061)
(5) Axle collar 10mm 2 (repair part number 68134/1 piece)
(6) Axle nut M12 1 (repair part number 38001)
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J, and up to 10-inch 4.0J can be installed (for 10-inch, +4cm or more is required).
*Only triple square pipes have chain sliders on the bottom as well.
*The Standard with Stabilizer Type 2 has a main pipe of 42mm x 32mm (thick pipe). (The regular Standard with Stabilizer has a 32mm x 32mm thin pipe specification).
*The rear shocks are attached in a "V" shape, but there is no problem with use.
*Due to individual differences in the vehicle, the brake switch stay may interfere. In such cases, bend the brake switch stay and install it after securing the necessary clearance for operation.
*Triple Square and Triple Square Mini come standard with pivot bearing specifications.
*The images are for illustration purposes, and the design and specifications of the products shown may change without notice. Please be aware.
適合車種の情報は現在登録されていません。
