1
/
of
4
Swingarm, twin-shock, triple square, no stabilizer, buffed, +4cm, Monkey, Gorilla
Swingarm, twin-shock, triple square, no stabilizer, buffed, +4cm, Monkey, Gorilla
SKU:gcr-90046
Regular price
¥44,258
Regular price
¥50,160
Sale price
¥44,258
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
443
points to be awarded
Couldn't load pickup availability
【G-Craft 90046 Swingarm Twin Shock Triple Square No Stabilizer Buff +4cm Monkey Gorilla】
Monkey Swingarm T/S Twin +4cm No Stabilizer
The standard width (for Monkey hub) swingarm for Monkeys is manufactured with the same width as the genuine Monkey swingarm (width 167-170mm).
You can use the genuine Monkey hub as is, or use the 39053 rear disc hub.
This swingarm is compatible with both drum and disc brakes.
It is G-Craft's most popular swingarm, with a wide variety of lengths available.
The Triple Square pipe swingarm, which uses a particularly strong "eye-shaped cross-section," is supported by over 80% of users who choose 16cm or longer.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +4cm
Material: 7N01, A5083 material used
Included parts
(1) Chain adjuster block 1 set (specific to each pipe shape)
(2) Twin shock mount bolts 1 set
(3) Drum brake rod 1 (depending on swingarm length)
*Not included with +0cm, +2cm.
Precautions
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8 inch 4.0J (if converting to disc with 8 inch 4.0J, please use dedicated rear hub (part number 39099))
*10 inch up to 3.5J can be installed (requires +4cm or more)
*Only Triple Square pipes have chain sliders on the bottom as well.
*Standard with stabilizer Type 2 has a main pipe of 42mm x 32mm thick pipe. (Normal standard with stabilizer is 32mm x 32mm thin pipe specification)
*Due to individual differences in vehicle bodies, the brake switch stay may interfere. In such cases, bend the brake switch stay and install it after securing the necessary clearance for operation.
*The axle shaft uses the genuine Monkey (underhead length 210mm).
*Triple Square and Triple Square Mini come standard with pivot bearing specifications.
*Stabilizer addition processing is not possible for Triple Square +4cm (due to interference between the center pipe and frame)
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware.
Monkey Swingarm T/S Twin +4cm No Stabilizer
The standard width (for Monkey hub) swingarm for Monkeys is manufactured with the same width as the genuine Monkey swingarm (width 167-170mm).
You can use the genuine Monkey hub as is, or use the 39053 rear disc hub.
This swingarm is compatible with both drum and disc brakes.
It is G-Craft's most popular swingarm, with a wide variety of lengths available.
The Triple Square pipe swingarm, which uses a particularly strong "eye-shaped cross-section," is supported by over 80% of users who choose 16cm or longer.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +4cm
Material: 7N01, A5083 material used
Included parts
(1) Chain adjuster block 1 set (specific to each pipe shape)
(2) Twin shock mount bolts 1 set
(3) Drum brake rod 1 (depending on swingarm length)
*Not included with +0cm, +2cm.
Precautions
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8 inch 4.0J (if converting to disc with 8 inch 4.0J, please use dedicated rear hub (part number 39099))
*10 inch up to 3.5J can be installed (requires +4cm or more)
*Only Triple Square pipes have chain sliders on the bottom as well.
*Standard with stabilizer Type 2 has a main pipe of 42mm x 32mm thick pipe. (Normal standard with stabilizer is 32mm x 32mm thin pipe specification)
*Due to individual differences in vehicle bodies, the brake switch stay may interfere. In such cases, bend the brake switch stay and install it after securing the necessary clearance for operation.
*The axle shaft uses the genuine Monkey (underhead length 210mm).
*Triple Square and Triple Square Mini come standard with pivot bearing specifications.
*Stabilizer addition processing is not possible for Triple Square +4cm (due to interference between the center pipe and frame)
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware.
適合車種の情報は現在登録されていません。
