1
/
of
4
Swingarm Twin Shock Triple Square No Stabilizer Buffed +16cm Monkey Gorilla
Swingarm Twin Shock Triple Square No Stabilizer Buffed +16cm Monkey Gorilla
SKU:gcr-90048
Regular price
¥44,258
Regular price
¥50,160
Sale price
¥44,258
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
443
points to be awarded
Couldn't load pickup availability
【G-Craft 90048 Swingarm Twin Shock Triple Square No Stabilizer Buff +16cm Monkey Gorilla】
Monkey Swingarm T/S Twin +16cm No Stabilizer
This is a standard width swingarm for Monkey (for Monkey hub), made with the same width (167-170mm) as the genuine Monkey swingarm.
You can use the genuine Monkey hub as is, or use the 39053 rear disc hub.
This swingarm is compatible with both drum and disc brakes.
It is G-Craft's most popular swingarm, with a wide variety of length options.
The Triple Square pipe swingarm, which uses a particularly strong "eye-shaped cross-section", is supported by over 80% of users who choose 16cm or longer.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +16cm
Material: 7N01, A5083 material used
Accessories
(1) Chain tensioner block 1 set (specific to each pipe shape)
(2) Twin shock suspension receiver bolt 1 set
(3) Drum brake rod 1 piece (depending on swingarm length)
*Not included with +0cm, +2cm.
Precautions
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8 inches 4.0J (if converting to disc with 8 inches 4.0J, please use the dedicated rear hub (part number 39099))
*Up to 10 inches 3.5J can be installed (+4cm or more required)
*Only Triple Square pipes have a chain slider on the bottom.
*Standard stabilizer type 2 has a main pipe of 42mm x 32mm thick pipe. (The usual standard stabilizer type has a 32mm x 32mm thin pipe specification)
*Due to individual differences in vehicles, the brake switch stay may interfere. In that case, bend the brake switch stay and install it after ensuring the necessary clearance for operation.
*The axle shaft uses a genuine Monkey one (underhead length 210mm).
*Triple Square and Triple Square Mini are equipped with pivot bearing specifications as standard.
*Additional stabilizer processing is not possible for Triple Square +4cm (due to interference between the center pipe and the frame)
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware.
Monkey Swingarm T/S Twin +16cm No Stabilizer
This is a standard width swingarm for Monkey (for Monkey hub), made with the same width (167-170mm) as the genuine Monkey swingarm.
You can use the genuine Monkey hub as is, or use the 39053 rear disc hub.
This swingarm is compatible with both drum and disc brakes.
It is G-Craft's most popular swingarm, with a wide variety of length options.
The Triple Square pipe swingarm, which uses a particularly strong "eye-shaped cross-section", is supported by over 80% of users who choose 16cm or longer.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +16cm
Material: 7N01, A5083 material used
Accessories
(1) Chain tensioner block 1 set (specific to each pipe shape)
(2) Twin shock suspension receiver bolt 1 set
(3) Drum brake rod 1 piece (depending on swingarm length)
*Not included with +0cm, +2cm.
Precautions
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8 inches 4.0J (if converting to disc with 8 inches 4.0J, please use the dedicated rear hub (part number 39099))
*Up to 10 inches 3.5J can be installed (+4cm or more required)
*Only Triple Square pipes have a chain slider on the bottom.
*Standard stabilizer type 2 has a main pipe of 42mm x 32mm thick pipe. (The usual standard stabilizer type has a 32mm x 32mm thin pipe specification)
*Due to individual differences in vehicles, the brake switch stay may interfere. In that case, bend the brake switch stay and install it after ensuring the necessary clearance for operation.
*The axle shaft uses a genuine Monkey one (underhead length 210mm).
*Triple Square and Triple Square Mini are equipped with pivot bearing specifications as standard.
*Additional stabilizer processing is not possible for Triple Square +4cm (due to interference between the center pipe and the frame)
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware.
適合車種の情報は現在登録されていません。
