Swingarm, Twin Shock, Triple Square, No Stabilizer, Buffed, +20cm, Monkey, Gorilla

【G-Craft 90049 Swingarm Twin Shock Triple Square Without Stabilizer Buff +20cm Monkey Gorilla】
Monkey Swingarm T/S Twin +20cm Without Stabilizer
This swingarm for the Monkey, with a standard width (for Monkey hub), is manufactured with the same width as the Monkey's genuine swingarm (width 167-170mm).
You can use the Monkey's genuine hub as is, or you can use the 39053 rear disc hub.
This swingarm is compatible with both drum and disc brakes.
It is G-Craft's most popular swingarm, with a wide variety of lengths available.
The Triple Square pipe swingarm, which employs a particularly strong "H-beam cross-section," is supported by over 80% of users who choose lengths of 16cm or more.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +20cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (specific to each pipe shape)
(2) Twin shock suspension receiver bolt 1 set
(3) Drum brake rod 1 (depending on swingarm length)
*Not included with +0cm, +2cm.
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J (if converting to disc with 8-inch 4.0J, please use the dedicated rear hub (part number 39099))
*Up to 10-inch 3.5J can be installed (requires +4cm or more)
*Only Triple Square pipes have chain sliders on the bottom as well.
*Standard with Stabilizer Type 2 has a main pipe of 42mm x 32mm thick pipe. (Normal Standard with Stabilizer is 32mm x 32mm thin pipe specification)
*Due to individual differences in vehicle bodies, the brake switch stay may interfere. In such cases, bend the brake switch stay and ensure the necessary clearance for operation before installation.
*The axle shaft uses the genuine Monkey (length under head 210mm).
*Triple Square and Triple Square Mini are standard equipped with pivot section bearings.
*If Triple Square +4cm, adding a stabilizer is not possible (due to interference between the center pipe and frame).
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.