1
/
of
4
Swingarm Twin Shock Triple Square with Stabilizer Buffed +16cm Monkey Gorilla
Swingarm Twin Shock Triple Square with Stabilizer Buffed +16cm Monkey Gorilla
SKU:gcr-90109
Regular price
¥54,621
Regular price
¥63,360
Sale price
¥54,621
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
547
points to be awarded
Couldn't load pickup availability
【G-Craft 90109 Swingarm, Twin Shock, Triple Square, with Stabilizer, Buffed +16cm, Monkey Gorilla】
Monkey Swingarm T/S Twin +16cm with Stabilizer
This Monkey swingarm has a standard width (for Monkey hubs) and is produced with the same width as the genuine Monkey swingarm (width 167-170mm).
You can use the genuine Monkey hub as is, or use the rear disc hub 39053.
This swingarm is compatible with both drum and disc brakes.
With a wide range of lengths to choose from, it is G-Craft's most popular swingarm.
The Triple Square pipe swingarm, which employs the particularly strong "me-no-ji section," boasts over 80% support from users who choose 16cm or longer.
Compatible models
Monkey, Gorilla
Surface treatment: Buffed finish
Size: +16cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (dedicated for each pipe shape)
(2) Twin shock absorber mounting bolts 1 set
(3) Drum brake rod 1 (depending on swingarm length)
*Not included for +0cm, +2cm
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J (if converting to disc brakes with 8-inch 4.0J, please use dedicated rear hub part number 39099)
*Up to 10-inch 3.5J can be installed (requires +4cm or more)
*Only Triple Square pipes have chain sliders on the bottom.
*Standard with stabilizer Type 2 has a main pipe of 42mm x 32mm thick pipe. (Regular standard with stabilizer is 32mm x 32mm thin pipe specification)
*Due to individual differences in vehicles, the brake switch stay may interfere. In such cases, bend the brake switch stay and install it after securing the necessary clearance for operation.
*The axle shaft uses genuine Monkey (underhead length 210mm).
*Triple Square and Triple Square Mini come standard with pivot bearing specifications.
*For Triple Square +4cm, stabilizer additional processing is not possible (due to interference between the center pipe and frame)
*Images are for illustration purposes only, and the design and specifications of the products shown may be changed without prior notice. Please understand.
Monkey Swingarm T/S Twin +16cm with Stabilizer
This Monkey swingarm has a standard width (for Monkey hubs) and is produced with the same width as the genuine Monkey swingarm (width 167-170mm).
You can use the genuine Monkey hub as is, or use the rear disc hub 39053.
This swingarm is compatible with both drum and disc brakes.
With a wide range of lengths to choose from, it is G-Craft's most popular swingarm.
The Triple Square pipe swingarm, which employs the particularly strong "me-no-ji section," boasts over 80% support from users who choose 16cm or longer.
Compatible models
Monkey, Gorilla
Surface treatment: Buffed finish
Size: +16cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (dedicated for each pipe shape)
(2) Twin shock absorber mounting bolts 1 set
(3) Drum brake rod 1 (depending on swingarm length)
*Not included for +0cm, +2cm
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J (if converting to disc brakes with 8-inch 4.0J, please use dedicated rear hub part number 39099)
*Up to 10-inch 3.5J can be installed (requires +4cm or more)
*Only Triple Square pipes have chain sliders on the bottom.
*Standard with stabilizer Type 2 has a main pipe of 42mm x 32mm thick pipe. (Regular standard with stabilizer is 32mm x 32mm thin pipe specification)
*Due to individual differences in vehicles, the brake switch stay may interfere. In such cases, bend the brake switch stay and install it after securing the necessary clearance for operation.
*The axle shaft uses genuine Monkey (underhead length 210mm).
*Triple Square and Triple Square Mini come standard with pivot bearing specifications.
*For Triple Square +4cm, stabilizer additional processing is not possible (due to interference between the center pipe and frame)
*Images are for illustration purposes only, and the design and specifications of the products shown may be changed without prior notice. Please understand.
適合車種の情報は現在登録されていません。
