1
/
of
4
Swingarm Twin Shock Standard No Stabilizer Buff +0cm Monkey Gorilla
Swingarm Twin Shock Standard No Stabilizer Buff +0cm Monkey Gorilla
SKU:gcr-90164
Regular price
¥36,219
Regular price
¥39,600
Sale price
¥36,219
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
363
points to be awarded
Couldn't load pickup availability
【G-Craft 90164 Swingarm Twin Shock Standard No Stabilizer Buff +0cm Monkey Gorilla】
Monkey Swingarm STD Twin +0cm No Stabilizer
The standard width Monkey swingarm (for Monkey hubs) is a swingarm manufactured with the same width as the genuine Monkey swingarm (width 167-170mm).
You can use the genuine Monkey hub as is, or use the 39053 rear disc hub.
This swingarm is compatible with both drum and disc brakes.
With a wide selection of lengths, it is G-Craft's most popular swingarm.
The triple square pipe swingarm, especially featuring the strong "eye-shaped cross-section," is supported by over 80% of users who choose lengths of 16cm or more.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +0cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster set (specific to each pipe shape)
(2) Twin shock mount bolt set
(3) Drum brake rod (depending on swingarm length)
*Not included with +0cm, +2cm
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8 inch 4.0J (If converting to disc with 8 inch 4.0J, please use dedicated rear hub part number 39099)
*10 inch can be fitted up to 3.5J (requires +4cm or more)
*Only triple square pipes have chain sliders on the bottom as well.
*The Standard with Stabilizer Type 2 has a main pipe of 42mm x 32mm thick pipe. (Normal Standard with Stabilizer is 32mm x 32mm thin pipe specification)
*Due to individual differences in vehicles, the brake switch stay may interfere. In such cases, bend the brake switch stay and install after ensuring the necessary clearance for operation.
*The axle shaft uses the genuine Monkey (under-head length 210mm).
*Triple Square and Triple Square Mini come standard with bearing specifications at the pivot.
*Stabilizer addition processing is not possible with Triple Square +4cm (due to interference between the center pipe and frame)
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.
Monkey Swingarm STD Twin +0cm No Stabilizer
The standard width Monkey swingarm (for Monkey hubs) is a swingarm manufactured with the same width as the genuine Monkey swingarm (width 167-170mm).
You can use the genuine Monkey hub as is, or use the 39053 rear disc hub.
This swingarm is compatible with both drum and disc brakes.
With a wide selection of lengths, it is G-Craft's most popular swingarm.
The triple square pipe swingarm, especially featuring the strong "eye-shaped cross-section," is supported by over 80% of users who choose lengths of 16cm or more.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +0cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster set (specific to each pipe shape)
(2) Twin shock mount bolt set
(3) Drum brake rod (depending on swingarm length)
*Not included with +0cm, +2cm
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8 inch 4.0J (If converting to disc with 8 inch 4.0J, please use dedicated rear hub part number 39099)
*10 inch can be fitted up to 3.5J (requires +4cm or more)
*Only triple square pipes have chain sliders on the bottom as well.
*The Standard with Stabilizer Type 2 has a main pipe of 42mm x 32mm thick pipe. (Normal Standard with Stabilizer is 32mm x 32mm thin pipe specification)
*Due to individual differences in vehicles, the brake switch stay may interfere. In such cases, bend the brake switch stay and install after ensuring the necessary clearance for operation.
*The axle shaft uses the genuine Monkey (under-head length 210mm).
*Triple Square and Triple Square Mini come standard with bearing specifications at the pivot.
*Stabilizer addition processing is not possible with Triple Square +4cm (due to interference between the center pipe and frame)
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.
適合車種の情報は現在登録されていません。
