1
/
of
4
Wide swingarm, twin-shock, triple square, with stabilizer, buffed, +20cm, Monkey Gorilla
Wide swingarm, twin-shock, triple square, with stabilizer, buffed, +20cm, Monkey Gorilla
SKU:gcr-90271
Regular price
¥59,172
Regular price
¥68,640
Sale price
¥59,172
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
592
points to be awarded
Couldn't load pickup availability
【G-Craft 90271 Wide Swingarm Twin Shock Triple Square with Stabilizer Buff +20cm Monkey Gorilla】
Monkey Wide Swingarm T/S Twin +20cm with Stabilizer
This wide swingarm (for wide hub) for the Monkey is manufactured with a width of 187-190mm.
A dedicated collar is included so that the stock Monkey hub can be used.
For disc conversion, the 39048 wide rear disc hub can be used.
Caliper support 33192 can be used.
The Triple Square pipe swingarm, which uses a strong "eye-shaped cross-section," is supported by over 80% of users who choose 16cm or longer.
When installing 8-4.0J or 10-4.0J, a G-Craft 7mm offset sprocket for the front and a G-Craft 8mm sprocket spacer for the rear are required.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +20cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (dedicated to each pipe shape)
(2) Twin shock suspension mounting bolts 1 set
(3) Drum brake rod 1 (depending on swingarm length)
(4) Axle shaft 230mm 1 (repair part number 38061)
(5) Axle collar 10mm 2 (repair part number 68134/1 piece per pack)
(6) Axle nut M12 1 (repair part number 38001)
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J and 10-inch 4.0J can be installed (10-inch requires +4cm or more)
*Only Triple Square pipe has a chain slider on the bottom as well.
*Standard with stabilizer Type 2 has a main pipe of 42mm x 32mm thick pipe. (Normal standard with stabilizer has a 32mm x 32mm thin pipe specification)
*The rear shocks are angled, but there is no problem with use.
*Due to individual differences in vehicles, the brake switch stay may interfere. In that case, bend the brake switch stay and install it after securing the necessary clearance for operation.
*Triple Square and Triple Square Mini come standard with pivot bearing specifications.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.
Monkey Wide Swingarm T/S Twin +20cm with Stabilizer
This wide swingarm (for wide hub) for the Monkey is manufactured with a width of 187-190mm.
A dedicated collar is included so that the stock Monkey hub can be used.
For disc conversion, the 39048 wide rear disc hub can be used.
Caliper support 33192 can be used.
The Triple Square pipe swingarm, which uses a strong "eye-shaped cross-section," is supported by over 80% of users who choose 16cm or longer.
When installing 8-4.0J or 10-4.0J, a G-Craft 7mm offset sprocket for the front and a G-Craft 8mm sprocket spacer for the rear are required.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +20cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (dedicated to each pipe shape)
(2) Twin shock suspension mounting bolts 1 set
(3) Drum brake rod 1 (depending on swingarm length)
(4) Axle shaft 230mm 1 (repair part number 38061)
(5) Axle collar 10mm 2 (repair part number 68134/1 piece per pack)
(6) Axle nut M12 1 (repair part number 38001)
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J and 10-inch 4.0J can be installed (10-inch requires +4cm or more)
*Only Triple Square pipe has a chain slider on the bottom as well.
*Standard with stabilizer Type 2 has a main pipe of 42mm x 32mm thick pipe. (Normal standard with stabilizer has a 32mm x 32mm thin pipe specification)
*The rear shocks are angled, but there is no problem with use.
*Due to individual differences in vehicles, the brake switch stay may interfere. In that case, bend the brake switch stay and install it after securing the necessary clearance for operation.
*Triple Square and Triple Square Mini come standard with pivot bearing specifications.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.
適合車種の情報は現在登録されていません。
