Wide Swingarm Monoshock Standard Stabilizer Type 2 Buff +16cm Monkey Gorilla

【G-Craft 90450 Wide Swingarm Monoshock Standard with Stabilizer Type 2 Buff +16cm Monkey Gorilla】
Monkey Wide Swingarm STD Mono +16cm with Stabilizer Type 2
The wide swingarm (for wide hubs) for Monkeys is manufactured with a width of 187-190mm.
A dedicated collar is included so that the genuine Monkey hub can be used.
For disc conversion, the 39048 wide rear disc hub can be used.
For disc specifications, the length of the brake stopper must be 25mm.
The triple square pipe swingarm, which adopts the strong "eye-shaped cross-section," is a pipe that boasts over 80% support from users who choose 16cm or longer.
When installing 8-4.0J, a G-Craft 4mm offset sprocket is required for the front, and a G-Craft 4mm sprocket spacer is required for the rear.
When installing 10-4.0, a G-Craft 7mm offset sprocket is required for the front, and a G-Craft 8mm sprocket spacer is required for the rear.
Compatible models
Monkey, Gorilla
Type: 2
Surface treatment: Buffed finish
Size: +16cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (specific to each pipe shape)
(2) Frame side monoshock receiver 1 set (repair part number 30033)
(3) Shock mounting bolt set
Bolt 1 (repair part number 65243)
Nut 1 (repair part number 65229)
Washer 2 (repair part number 65090/1 piece)
Collar 17.9mm 2 (repair part number 68104/1 piece)
(4) Seat fixing collar 22mm 2 (repair part number 68133)
(5) Drum brake rod 1 (depending on swingarm length)
(6) Axle shaft 230mm 1 (repair part number 38061)
(7) Axle collar 10mm 2 (repair part number 68134/1 piece)
(8) Axle nut M12 1 (repair part number 38001)
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8 inch 4.0J (discs up to 3.5J), and 10 inch up to 4.0J can be installed.
*Only triple square pipes have chain sliders on the bottom as well.
*The Standard Stabilizer Type 2 has a main pipe of 42mm x 32mm thick pipe. (Normal Standard Stabilizer type has a 32mm x 32mm thin pipe specification)
*Please use genuine NSR50/80 rear shocks.
*Ohlins TTX cannot be installed.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware.