1
/
of
5
Super Wide Swingarm, Low Cost, Twin Shock, Standard, No Stabilizer, Buff, +16cm, Monkey, Gorilla
Super Wide Swingarm, Low Cost, Twin Shock, Standard, No Stabilizer, Buff, +16cm, Monkey, Gorilla
SKU:gcr-90554
Regular price
¥44,258
Regular price
¥50,160
Sale price
¥44,258
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
443
points to be awarded
Couldn't load pickup availability
[G-Craft 90554 Super Wide Swingarm Low-Cost Twin Shock Standard No Stabilizer Buff +16cm Monkey Gorilla]
Monkey Super Wide S/A Low-Cost STD Twin +16cm No Stabilizer
This is the widest swingarm for Monkeys (207-210mm), allowing the installation of 5.5J wide wheels. Compared to the genuine Monkey swingarm (width 167-170mm), it is 20mm wider on each side.
By installing the 39419 20mm sprocket spacer, you can use the genuine Monkey hub or a wide disc rear hub. This swingarm is compatible with both drum and disc brakes.
There are two types available: one that uses the 30047 super wide shock mount and a low-cost type that does not use a shock mount.
■If you want to change from drum specification to disc specification■
You can change the specification by cutting the brake stopper.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +16cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (specific to each pipe shape)
(2) Twin shock mount bolt 1 set
(3) Drum brake rod 1 (depending on the length of the swingarm)
(4) Axle shaft 250mm 1 (repair part number 38053)
(5) Axle collar 20mm 1 (repair part number 394216)
(6) Axle nut M12 1 (repair part number 38001)
Precautions
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*To prevent interference between the side stand and stabilizer, the 30102 stand holder type 2 is required for swingarms with stabilizers.
*Only triple square pipes have chain sliders on the bottom as well.
*The low-cost type shock mount is about 30mm higher than the regular twin shock type.
*Due to individual differences in vehicles, the brake switch stay may interfere. In such cases, bend the brake switch stay to ensure the necessary clearance before installation.
*Triple square, has a standard bearing specification for the pivot part.
*The images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware of this.
Monkey Super Wide S/A Low-Cost STD Twin +16cm No Stabilizer
This is the widest swingarm for Monkeys (207-210mm), allowing the installation of 5.5J wide wheels. Compared to the genuine Monkey swingarm (width 167-170mm), it is 20mm wider on each side.
By installing the 39419 20mm sprocket spacer, you can use the genuine Monkey hub or a wide disc rear hub. This swingarm is compatible with both drum and disc brakes.
There are two types available: one that uses the 30047 super wide shock mount and a low-cost type that does not use a shock mount.
■If you want to change from drum specification to disc specification■
You can change the specification by cutting the brake stopper.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +16cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (specific to each pipe shape)
(2) Twin shock mount bolt 1 set
(3) Drum brake rod 1 (depending on the length of the swingarm)
(4) Axle shaft 250mm 1 (repair part number 38053)
(5) Axle collar 20mm 1 (repair part number 394216)
(6) Axle nut M12 1 (repair part number 38001)
Precautions
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*To prevent interference between the side stand and stabilizer, the 30102 stand holder type 2 is required for swingarms with stabilizers.
*Only triple square pipes have chain sliders on the bottom as well.
*The low-cost type shock mount is about 30mm higher than the regular twin shock type.
*Due to individual differences in vehicles, the brake switch stay may interfere. In such cases, bend the brake switch stay to ensure the necessary clearance before installation.
*Triple square, has a standard bearing specification for the pivot part.
*The images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware of this.
適合車種の情報は現在登録されていません。
