1
/
of
5
Super Wide Swingarm, Low Cost, Twin Shock, Triple Square, No Stabilizer, Buffed, +20cm, Monkey/Gorilla
Super Wide Swingarm, Low Cost, Twin Shock, Triple Square, No Stabilizer, Buffed, +20cm, Monkey/Gorilla
SKU:gcr-90559
Regular price
¥50,255
Regular price
¥59,400
Sale price
¥50,255
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
503
points to be awarded
Couldn't load pickup availability
【G-Craft 90559 Super Wide Swingarm Low Cost Twin Shock Triple Square No Stabilizer Buff +20cm Monkey Gorilla】
Monkey Super Wide S/A Low Cost T/S Twin +20cm No Stabilizer
This is the widest swingarm for Monkeys (207-210mm), allowing installation of 5.5J wide wheels. Compared to the Monkey's stock swingarm (167-170mm wide), it is 20mm wider on each side.
By installing the 39419 20mm sprocket spacer, you can use the Monkey's stock hub or a wide disc rear hub. This swingarm is compatible with both drum and disc brakes.
There are two types available: one that uses the 30047 super wide suspension mount and a low-cost type that does not use the suspension mount.
■ If you want to change from drum specification to disc specification ■
You can change the specification by cutting the brake stopper.
Compatible models
Monkey, Gorilla
Surface treatment: Buffed finish
Size: +20cm
Material: 7N01, A5083 material used
Included parts
(1) Chain adjuster block 1 set (specific for each pipe shape)
(2) Twin shock suspension mount bolt 1 set
(3) Drum brake rod 1 (depending on swingarm length)
(4) Axle shaft 250mm 1 (repair part number 38053)
(5) Axle collar 20mm 1 (repair part number 394216)
(6) Axle nut M12 1 (repair part number 38001)
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*To prevent interference between the side stand and the stabilizer, swingarms with stabilizers require the 30102 stand holder type 2.
*Only Triple Square pipes have chain sliders on the bottom as well.
*The suspension mount on the low-cost type is approximately 30mm higher than the normal twin shock type.
*Due to individual differences in the vehicle, the brake switch stay may interfere. In such cases, bend the brake switch stay and install it after ensuring the necessary clearance for operation.
*Triple Square comes standard with bearings in the pivot section.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.
Monkey Super Wide S/A Low Cost T/S Twin +20cm No Stabilizer
This is the widest swingarm for Monkeys (207-210mm), allowing installation of 5.5J wide wheels. Compared to the Monkey's stock swingarm (167-170mm wide), it is 20mm wider on each side.
By installing the 39419 20mm sprocket spacer, you can use the Monkey's stock hub or a wide disc rear hub. This swingarm is compatible with both drum and disc brakes.
There are two types available: one that uses the 30047 super wide suspension mount and a low-cost type that does not use the suspension mount.
■ If you want to change from drum specification to disc specification ■
You can change the specification by cutting the brake stopper.
Compatible models
Monkey, Gorilla
Surface treatment: Buffed finish
Size: +20cm
Material: 7N01, A5083 material used
Included parts
(1) Chain adjuster block 1 set (specific for each pipe shape)
(2) Twin shock suspension mount bolt 1 set
(3) Drum brake rod 1 (depending on swingarm length)
(4) Axle shaft 250mm 1 (repair part number 38053)
(5) Axle collar 20mm 1 (repair part number 394216)
(6) Axle nut M12 1 (repair part number 38001)
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*To prevent interference between the side stand and the stabilizer, swingarms with stabilizers require the 30102 stand holder type 2.
*Only Triple Square pipes have chain sliders on the bottom as well.
*The suspension mount on the low-cost type is approximately 30mm higher than the normal twin shock type.
*Due to individual differences in the vehicle, the brake switch stay may interfere. In such cases, bend the brake switch stay and install it after ensuring the necessary clearance for operation.
*Triple Square comes standard with bearings in the pivot section.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.
適合車種の情報は現在登録されていません。
