1
/
of
2
GC-022 Frame-Exclusive Wide Swingarm, Monoshock, Triple Square, No Stabilizer, Buff, +20cm, Monkey, Gorilla
GC-022 Frame-Exclusive Wide Swingarm, Monoshock, Triple Square, No Stabilizer, Buff, +20cm, Monkey, Gorilla
SKU:gcr-90574
Regular price
¥63,724
Regular price
¥73,920
Sale price
¥63,724
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Ships in 2-6 business days
配送方法/参考送料:Courier delivery: shipping fee ¥698
638
points to be awarded
Couldn't load pickup availability
[G-Craft 90574 GC-022 Frame Specific Wide Swingarm Monoshock Triple Square No Stabilizer Buff +20cm Monkey Gorilla]
GC-022 Frame Specific S/A Wide +20cm T/S No Stabilizer
This swingarm is designed with a width of 187-190mm to allow the use of the stock Monkey hub.
The 39048 wide rear disc hub can also be used.
This swingarm is compatible with both drum and disc brakes.
The triple square pipe swingarm, which uses a lightweight and high-rigidity "eye-shaped cross-section," is a pipe that boasts over 80% support.
Exclusively designed for GC-022 frame (39895).
When installing 8-4.0J, a 4mm offset sprocket is required for the front, and a 4mm sprocket spacer is required for the rear.
When installing 10-4.0, a front sprocket is not required as it can be offset on the engine side. (If using a normal hub, an 8mm offset sprocket spacer is required)
Compatible models
Monkey, Gorilla (for GC-022 aluminum frame)
Surface treatment: Buffed finish
Size: +20cm
Material: 7N01, A5083 material used
Accessories
(1) Chain tensioner adjuster 1 set (dedicated for each pipe shape)
(2) Shock mounting bolt set
Bolt 1 (Repair part number 691765)
Nut 1 (Repair part number 65229)
Washer 2 (Repair part number 65090/1 piece)
(3) Seat fixing collar 22mm 2 (Repair part number 68133/1 piece)
(4) Drum brake rod 1 (depending on swingarm length)
(5) Axle shaft 230mm 1 (Repair part number 38061)
(6) Axle collar 10mm 2 (Repair part number 68134/1 piece)
(7) Axle nut M12 1 (Repair part number 38001)
Notes
*T/S (Triple Square) and S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J and 10-inch 4.0J can be installed. (+4cm or more is required)
*Chain sliders are pre-installed on top and bottom.
*Exclusively for NSR50/80 rear shocks. (Ohlins TTX cannot be installed)
*The stabilizer will be on the bottom.
*When using discs, the brake stopper needs to be cut.
*The image is for illustration purposes only, and the design and specifications of the products shown may be changed without prior notice. Please understand.
GC-022 Frame Specific S/A Wide +20cm T/S No Stabilizer
This swingarm is designed with a width of 187-190mm to allow the use of the stock Monkey hub.
The 39048 wide rear disc hub can also be used.
This swingarm is compatible with both drum and disc brakes.
The triple square pipe swingarm, which uses a lightweight and high-rigidity "eye-shaped cross-section," is a pipe that boasts over 80% support.
Exclusively designed for GC-022 frame (39895).
When installing 8-4.0J, a 4mm offset sprocket is required for the front, and a 4mm sprocket spacer is required for the rear.
When installing 10-4.0, a front sprocket is not required as it can be offset on the engine side. (If using a normal hub, an 8mm offset sprocket spacer is required)
Compatible models
Monkey, Gorilla (for GC-022 aluminum frame)
Surface treatment: Buffed finish
Size: +20cm
Material: 7N01, A5083 material used
Accessories
(1) Chain tensioner adjuster 1 set (dedicated for each pipe shape)
(2) Shock mounting bolt set
Bolt 1 (Repair part number 691765)
Nut 1 (Repair part number 65229)
Washer 2 (Repair part number 65090/1 piece)
(3) Seat fixing collar 22mm 2 (Repair part number 68133/1 piece)
(4) Drum brake rod 1 (depending on swingarm length)
(5) Axle shaft 230mm 1 (Repair part number 38061)
(6) Axle collar 10mm 2 (Repair part number 68134/1 piece)
(7) Axle nut M12 1 (Repair part number 38001)
Notes
*T/S (Triple Square) and S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J and 10-inch 4.0J can be installed. (+4cm or more is required)
*Chain sliders are pre-installed on top and bottom.
*Exclusively for NSR50/80 rear shocks. (Ohlins TTX cannot be installed)
*The stabilizer will be on the bottom.
*When using discs, the brake stopper needs to be cut.
*The image is for illustration purposes only, and the design and specifications of the products shown may be changed without prior notice. Please understand.
適合車種の情報は現在登録されていません。
